732 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :SAVE Commands
:SAVE:IMAGe:FORMat
(see page 1428)
Command Syntax
:SAVE:IMAGe:FORMat <format>
<format> ::= {{BMP | BMP24bit} | BMP8bit | PNG}
The :SAVE:IMAGe:FORMat command sets the image format type.
Query Syntax
:SAVE:IMAGe:FORMat?
The :SAVE:IMAGe:FORMat? query returns the selected image format type.
Return Format
<format><NL>
<format> ::= {BMP | BMP8 | PNG | NONE}
When NONE is returned, it indicates that a waveform data file format is currently
selected.
See Also • "Introduction to :SAVE Commands" on page 725
• ":SAVE:IMAGe[:STARt]" on page 730
• ":SAVE:IMAGe:FACTors" on page 731
• ":SAVE:IMAGe:INKSaver" on page 733
• ":SAVE:IMAGe:PALette" on page 734
• ":SAVE:WAVeform:FORMat" on page 748
To Next Page
Loading...
