Keysight Technologies InfiniiVision MSO-X 4154A

846 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
29 :SBUS<n> Commands
:SBUS<n>:I2S:BASE
(see page 1428)
Command Syntax
:SBUS<n>:I2S:BASE <base>
<base> ::= {DECimal | HEX}
The :SBUS<n>:I2S:BASE command determines the base to use for the I2S decode
display.
Query Syntax
:SBUS<n>:I2S:BASE?
The :SBUS<n>:I2S:BASE? query returns the current I2S display decode base.
Return Format
<base><NL>
<base> ::= {DECimal | HEX}
Errors • "-241, Hardware missing" on page 1387
See Also • "Introduction to :SBUS<n> Commands" on page 755
• ":SBUS<n>:I2S Commands" on page 843