Keysight Technologies InfiniiVision MSO-X 4154A

:TRIGger Commands 33
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1183
:TRIGger:NFC:STANdard
(see page 1428)
Command Syntax
:TRIGger:NFC:STANdard <standard>
<standard> ::= {{A | A106} | {B | B106} | F212 | F424}
The :TRIGger:NFC:STANdard command selects the signaling technology used by
the input signal:
• A or A106 — NFC-A standard, 106 kbits/s.
• B or B106 — NFC-A standard, 106 kbits/s.
• F212 — NFC-F standard, 212 kbits/s.
• F424 — NFC-F standard, 424 kbits/s.
Query Syntax
:TRIGger:NFC:STANdard?
The :TRIGger:NFC:STANdard? query returns the signaling technology setting.
Return Format
<standard><NL>
<standard> ::= {{A | A106} | {B | B106} | F212 | F424}
See Also • ":TRIGger:NFC:AEVent" on page 1180
• ":TRIGger:NFC:ATTime" on page 1181
• ":TRIGger:NFC:SOURce" on page 1182
• ":TRIGger:NFC:TEVent" on page 1184
• ":TRIGger:NFC:TIMeout" on page 1186
• ":TRIGger:NFC:TIMeout:ENABle" on page 1187
• ":TRIGger:NFC:TIMeout:TIME" on page 1188