532 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
22 :MEASure Commands
:MEASure:STATistics:DISPlay
(see page 1428)
Command Syntax
:MEASure:STATistics:DISPlay {{0 | OFF} | {1 | ON}}
The :MEASure:STATistics:DISPlay command disables or enables the display of the
measurement statistics.
Query Syntax
:MEASure:STATistics:DISPlay?
The :MEASure:STATistics:DISPlay? query returns the state of the measurement
statistics display.
Return Format
{0 | 1}<NL>
See Also • "Introduction to :MEASure Commands" on page 488
• ":MEASure:RESults" on page 523
• ":MEASure:STATistics" on page 531
• ":MEASure:STATistics:MCOunt" on page 534
• ":MEASure:STATistics:RESet" on page 535
• ":MEASure:STATistics:INCRement" on page 533
• ":MEASure:STATistics:RSDeviation" on page 536
To Next Page
Loading...
