:SEARch Commands 30
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1055
:SEARch:SERial:IIC:PATTern:ADDRess
(see page 1428)
Command Syntax
:SEARch:SERial:IIC:PATTern:ADDRess <value>
<value> ::= integer or <string>
<string> ::= "0xnn" n ::= {0,..,9 | A,..,F}
The :SEARch:SERial:IIC:PATTern:ADDRess command specifies address values
when searching for IIC events.
To set don't care values, use the integer -1.
Query Syntax
:SEARch:SERial:IIC:PATTern:ADDRess?
The :SEARch:SERial:IIC:PATTern:ADDRess? query returns the current address
value setting.
Return Format
<value><NL>
<value> ::= integer
See Also • Chapter 30, “:SEARch Commands,” starting on page 993
• ":SEARch:SERial:IIC:MODE" on page 1053
To Next Page
Loading...
