:SYSTem Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1117
:SYSTem:RLOGger:STATe
(see page 1428)
Command Syntax
:SYSTem:RLOGger:STATe {{0 | OFF} | {1 | ON}}
The :SYSTem:RLOGger:STATe command enables or disables remote command
logging.
Query Syntax
:SYSTem:RLOGger:STATe?
The :SYSTem:RLOGger:STATe? query returns the remote command logging state.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":SYSTem:RLOGger" on page 1113
• ":SYSTem:RLOGger:DESTination" on page 1114
• ":SYSTem:RLOGger:DISPlay" on page 1115
• ":SYSTem:RLOGger:FNAMe" on page 1116
• ":SYSTem:RLOGger:TRANsparent" on page 1118
• ":SYSTem:RLOGger:WMODe" on page 1119
To Next Page
Loading...
