1310 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
35 :WGEN<w> Commands
:WGEN<w>:TRACk:CSIGnal
(see page 1428)
Command Syntax
:WGEN<w>:TRACk:CSIGnal
The :WGEN<w>:TRACk:CSIGnal command sets the other waveform generator
output to be identical to this waveform generator output (except that the shape of
either output may be inverted).
If the signal selected is ARB, the ARB waveform is copied as well.
See Also • ":WGEN<w>:TRACk" on page 1308
• ":WGEN<w>:TRACk:AMPLitude" on page 1309
• ":WGEN<w>:TRACk:FREQuency" on page 1311
• ":WGEN<w>:TRACk:PHASe" on page 1312
To Next Page
Loading...
