Keysight Technologies InfiniiVision MSO-X 4154A

:FUNCtion<m> Commands 18
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 405
:FUNCtion<m>[:FFT]:GATE
(see page 1428)
Command Syntax
:FUNCtion<m>[:FFT]:GATE <gating>
<m> ::= 1-4 in NR1 format
<gating> ::= {NONE | ZOOM}
The :FUNCtion<m>[:FFT]:GATE command specifies whether the FFT is performed
on the Main time base window (NONE) or the ZOOM window when the zoomed
time base is displayed.
Query Syntax
:FUNCtion<m>[:FFT]:GATE?
The :FUNCtion<m>[:FFT]:GATE? query returns the gate setting.
Return Format
<gating><NL>
<gating> ::= {NONE | ZOOM}
See Also • ":FUNCtion<m>[:FFT]:VTYPe" on page 408
• ":FUNCtion<m>[:FFT]:WINDow" on page 409
• "Introduction to :FUNCtion<m> Commands" on page 393
• ":FUNCtion<m>:OPERation" on page 416