Keysight Technologies InfiniiVision MSO-X 4154A

:SBUS<n> Commands 29
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 923
:SBUS<n>:SENT:TRIGger:FAST:DATA
(see page 1428)
Command Syntax
:SBUS<n>:SENT:TRIGger:FAST:DATA <string>
<string> ::= "nnnn..." where n ::= {0|1|X}
<string> ::= "0xn..." where n ::= {0,..,9 | A,..,F | X | $}
The :SBUS<n>:SENT:TRIGger:FAST:DATA command specifies the status and data
nibbles that will be triggered on when the FCData trigger mode is chosen.
Query Syntax
:SBUS<n>:SENT:TRIGger:FAST:DATA?
The :SBUS<n>:SENT:TRIGger:FAST:DATA? query returns the fast channel data
trigger setting.
Return Format
<string><NL>
<string> ::= "nnnn..." where n ::= {0|1|X}
<string> ::= "0xn..." where n ::= {0,..,9 | A,..,F | X | $}
See Also • ":SBUS<n>:SENT:CLOCk" on page 900
• ":SBUS<n>:SENT:CRC" on page 901
• ":SBUS<n>:SENT:DISPlay" on page 902
• ":SBUS<n>:SENT:FORMat" on page 904
• ":SBUS<n>:SENT:IDLE" on page 906
• ":SBUS<n>:SENT:LENGth" on page 907
• ":SBUS<n>:SENT:PPULse" on page 908
• ":SBUS<n>:SENT:SIGNal<s>:DISPlay" on page 909
• ":SBUS<n>:SENT:SIGNal<s>:LENGth" on page 910
• ":SBUS<n>:SENT:SIGNal<s>:MULTiplier" on page 912
• ":SBUS<n>:SENT:SIGNal<s>:OFFSet" on page 913
• ":SBUS<n>:SENT:SIGNal<s>:ORDer" on page 914
• ":SBUS<n>:SENT:SIGNal<s>:STARt" on page 916
• ":SBUS<n>:SENT:SOURce" on page 918
• ":SBUS<n>:SENT:TOLerance" on page 920
• ":SBUS<n>:SENT:TRIGger" on page 921
• ":SBUS<n>:SENT:TRIGger:SLOW:DATA" on page 924
• ":SBUS<n>:SENT:TRIGger:SLOW:ID" on page 926
• ":SBUS<n>:SENT:TRIGger:SLOW:ILENgth" on page 928
• ":SBUS<n>:SENT:TRIGger:TOLerance" on page 929