:POWer Commands 26
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 657
:POWer:ITYPe
(see page 1428)
Command Syntax
:POWer:ITYPe <type>
<type> ::= {DC | AC}
The :POWer:ITYPe command specifies the type of power that is being converted
from the input (DC or AC). Your selection affects how the measurements are made.
This setting is used in the Inrush Current and Turn On/Turn Off tests.
Query Syntax
:POWer:ITYPe?
The :POWer:ITYPe? query returns the input power type setting.
Return Format
<type><NL>
<type> ::= {DC | AC}
See Also • ":POWer:INRush:APPLy" on page 654
• ":POWer:ONOFf:APPLy" on page 661
To Next Page
Loading...
