254 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
6 Root (:) Commands
Return Format <value><NL>
<value> ::= integer in NR1 format.
See Also • "Introduction to Root (:) Commands" on page 226
• ":CHANnel<n>:PROTection" on page 319
• ":OPEE (Operation Status Enable Register)" on page 245
• ":OVLenable (Overload Event Enable Register)" on page 251
• "*STB (Read Status Byte)" on page 218
• "*SRE (Service Request Enable)" on page 216
1 Channel 2 OVL Overload has occurred on Channel 2 input.
0 Channel 1 OVL Overload has occurred on Channel 1 input.
Table 89 Overload Event Register (OVLR) (continued)
Bit Description When Set (1 = High = True), Indicates:
To Next Page
Loading...
