Keysight Technologies InfiniiVision MSO-X 4154A User Manual

1492 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
39 Obsolete and Discontinued Commands
:CHANnel:THReshold (see
page 1500)
:POD<n>:THReshold (see
page 703) or
:DIGital<d>:THReshold (see
page 399)
:CHANnel2:SKEW (see
page 1501)
:CHANnel<n>:PROBe:SKEW
(see page 359)
:CHANnel<n>:INPut (see
page 1502)
:CHANnel<n>:IMPedance (see
page 350)
:CHANnel<n>:PMODe (see
page 1503)
none
:DISPlay:CONNect (see
page 1504)
:DISPlay:VECTors (see
page 425)
:DISPlay:ORDer (see
page 1505)
none
:ERASe (see page 1506) :DISplay:CLEar (see page 411)
:EXTernal:PMODe (see
page 1507)
none
FUNCtion1, FUNCtion2 :FUNCtion Commands (see
page 455)
ADD not included
:FUNCtion Commands :FUNCtion2 Commands (see
page 455)
:FUNCtion commands (with no
<m> number) map to
:FUNCtion2. This allows legacy
programs to work without
change.
:FUNCtion:GOFT:OPERation
(see page 1508)
:FUNCtion1:OPERation (see
page 490)
GOFT maps to FUNCtion1.
:FUNCtion:GOFT:SOURce1 (see
page 1509)
:FUNCtion1:SOURce1 (see
page 498)
GOFT maps to FUNCtion1.
:FUNCtion:GOFT:SOURce2 (see
page 1510)
:FUNCtion1:SOURce2 (see
page 500)
GOFT maps to FUNCtion1.
:FUNCtion:SOURce (see
page 1511)
:FUNCtion:SOURce1 (see
page 498)
Obsolete command has ADD,
SUBTract, and MULTiply
parameters; current command
has GOFT parameter.
:FUNCtion:VIEW (see
page 1512)
:FUNCtion:DISPlay (see
page 469)
:HARDcopy:DESTination (see
page 1513)
:HARDcopy:FILename (see
page 1514)
Obsolete Command Current Command Equivalent Behavior Differences

Keysight Technologies InfiniiVision MSO-X 4154A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision MSO-X 4154A
Category	Test Equipment
Language	English