Keysight Technologies InfiniiVision MSO-X 4154A

210 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
5 Common (*) Commands
<Digital Voltmeter> ::= {0 | DVM}
<Spectrum Visualizer> ::= {0 | OSV}
<USB 2.0 Low/Full Speed> ::= {0 | USBFL}
<USB 2.0 High Speed> ::= {0 | USBH}
<USB 2.0 Signal Quality Analysis> ::= {0 | USBSQ}
<Remote Command Logging> ::= {0 | RML}
<SENT Serial> ::= {0 | SENSOR}
<CAN FD Serial> ::= {0 | CANFD}
<CXPI Serial> ::= {0 | CXPI}
<NFC Trigger> ::= {0 | NFC}
The <MSO> field indicates whether the unit is a mixed-signal
oscilloscope.
The *OPT? query returns the following:
See Also • "Introduction to Common (*) Commands" on page 200
• "*IDN (Identification Number)" on page 206
Module Module Id
No modules attached 0,0,0,0,0,0,MEMUP,0,0,0,0,0,SGM,0,0,0,0,0,0,0,0,0,0,0,0,ADVMATH,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0