Keysight Technologies InfiniiVision MSO-X 4154A

579
Keysight InfiniiVision 4000 X-Series Oscilloscopes
Programmer's Guide
24 :MTESt Commands
The MTESt subsystem commands and queries control the mask test features. See
"Introduction to :MTESt Commands" on page 581.
Table 107 :MTESt Commands Summary
Command Query Options and Query Returns
:MTESt:ALL {{0 | OFF}
| {1 | ON}} (see
page 584)
:MTESt:ALL? (see
page 584)
{0 | 1}
:MTESt:AMASk:CREate
(see page 585)
n/a n/a
:MTESt:AMASk:SOURce
<source> (see
page 586)
:MTESt:AMASk:SOURce?
(see page 586)
<source> ::= CHANnel<n>
<n> ::= {1 | 2 | 3 | 4} for 4ch
models
<n> ::= {1 | 2} for 2ch models
:MTESt:AMASk:UNITs
<units> (see page 587)
:MTESt:AMASk:UNITs?
(see page 587)
<units> ::= {CURRent | DIVisions}
:MTESt:AMASk:XDELta
<value> (see page 588)
:MTESt:AMASk:XDELta?
(see page 588)
<value> ::= X delta value in NR3
format
:MTESt:AMASk:YDELta
<value> (see page 589)
:MTESt:AMASk:YDELta?
(see page 589)
<value> ::= Y delta value in NR3
format
n/a :MTESt:COUNt:FWAVefor
ms? [CHANnel<n>] (see
page 590)
<failed> ::= number of failed
waveforms in NR1 format
:MTESt:COUNt:RESet
(see page 591)
n/a n/a
n/a :MTESt:COUNt:TIME?
(see page 592)
<time> ::= elapsed seconds in NR3
format
n/a :MTESt:COUNt:WAVeform
s? (see page 593)
<count> ::= number of waveforms
in NR1 format
:MTESt:DATA <mask>
(see page 594)
:MTESt:DATA? (see
page 594)
<mask> ::= data in IEEE 488.2 #
format.