Keysight Technologies InfiniiVision MSO-X 4154A

Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 9
*RCL (Recall) / 211
*RST (Reset) / 212
*SAV (Save) / 215
*SRE (Service Request Enable) / 216
*STB (Read Status Byte) / 218
*TRG (Trigger) / 220
*TST (Self Test) / 221
*WAI (Wait To Continue) / 222
6 Root (:) Commands
:ACTivity / 227
:AER (Arm Event Register) / 228
:AUToscale / 229
:AUToscale:AMODE / 231
:AUToscale:CHANnels / 232
:AUToscale:FDEBug / 233
:BLANk / 234
:DIGitize / 235
:HWEenable (Hardware Event Enable Register) / 237
:HWERegister:CONDition (Hardware Event Condition Register) / 239
:HWERegister[:EVENt] (Hardware Event Event Register) / 240
:MTEenable (Mask Test Event Enable Register) / 241
:MTERegister[:EVENt] (Mask Test Event Event Register) / 243
:OPEE (Operation Status Enable Register) / 245
:OPERegister:CONDition (Operation Status Condition Register) / 247
:OPERegister[:EVENt] (Operation Status Event Register) / 249
:OVLenable (Overload Event Enable Register) / 251
:OVLRegister (Overload Event Register) / 253
:PRINt / 255
:RUN / 256
:SERial / 257
:SINGle / 258
:STATus / 259
:STOP / 260
:TER (Trigger Event Register) / 261
:VIEW / 262
7 :ACQuire Commands
:ACQuire:COMPlete / 265
:ACQuire:COUNt / 266
:ACQuire:MODE / 267