12: S–MFX (Master Effect) 12–1: SETUP
135
For more information, please see the “Sequencer: FUNCTION”
section on page 137.
12: S–MFX (Master Effect)
Here you can adjust the settings for the master effects. For
instance, you can:
• Route a sound to the master effects.
• Create detailed settings for the master effects.
For more information, please see the “Effect Guide” section on
page 207.
12–1: SETUP
• Here you can specify the type of master effects, and turn them
On/Off.
• The master effects are sent to the L/R bus.
These parameters are the same as in Program mode.
For more information, please see the “18–1: SETUP” section on
page 62.
1(MFX1)
Effect On/Off [Off, On]
Effect Select [000,S01...S87, D00...D13]
Return 1 [000...127]
Chain [Off, On]
Chain Level [000...127]
2 (MFX2)
Effect On/Off [Off, On]
Effect Select [000...120]
Return 2 [000...127]
These parameters are the same as in Program mode.
For more information, please see the “18–2: MFX1 (Master Effect
1)” section on page 62.