Korg KROSS - Limiter - Cho;Flng (Limiter - Chorus;Flanger)

Single size effects 084: Limiter - Cho/Flng (Limiter - Chorus/Flanger)
263
084: Limiter - Cho/Flng (Limiter -
Chorus/Flanger)
This effect combines a mono limiter and a chorus/flanger. You can
change the order of the effects.
085: Exciter - Cho/Flng (Exciter -
Chorus/Flanger)
This effect combines a mono limiter and a chorus/flanger.
Paramter Value Explanation
Limiter
L Ratio ←
1.0 : 1...
50.0 : 1, Inf : 1
Sets the signal
compression ratio
p.218
Thrsh [dB]
Threshold
[dB]
–40...0
Sets the level above
which the
compressor is applied
p.218
L Attack ← 1...100 Sets the attack time
Release ← 1...100 Sets the release time
L Gain [dB]
Gain Adjust
[dB]
–Inf,
–38...+24
Sets the limiter
output gain p.218
Chorus/Flanger
F LFO[Hz]
LFO Freq
[Hz]
0.02...20.00
Sets the speed of the
LFO
LFO
LFO
Waveform
Tri (Triangle),
Sine
Selects the LFO
Waveform
F Depth Depth 0...100
Sets the depth of LFO
modulation
Dly[ms]
Delay Time
[ms]
0.0...110.0 Sets the delay time
F.back Feedback –100...+100
Sets the feedback
amount p.257
F EQ Trim Pre EQ Trim 0...100
Sets the EQ input
level
F LEQ [dB]
Low EQ Gain
[dB]
–15...+15
Sets the gain of Low
EQ
HEQ [dB]
High EQ
Gain [dB]
–15...+15
Sets the gain of High
EQ
F Wet/Dry
[Cho/Fln]
Wet/Dry
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Sets the effect
balance of the
chorus/flanger
p.226, p.257
Src
[Cho/Fln]
Source
Off...Tempo
Selects the Wet/Dry
modulation source
for the chorus/flanger
Amt
[Cho/Fln]
Amount
–100...+100
Sets the Wet/Dry
modulation amount
for the chorus/flanger
F Out
Output
Mode
Normal,
Wet Invert
Selects the output
mode for the chorus/
flanger p.263
Routing ←
Limiter
→
Fl
anger,
Flanger →
Limiter
Switches the order of
the limiter and
chorus/flanger
Wet/Dry ←
–Wet...
–99 : 1, Dry,
99 : 1...Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
+
Routing
Chorus/Flanger
Feedback
Cho/Flng Wet / Dry
Normal
Wet Invert
Output Mode
–
+
Limiter
Limiter
Gain Adjust
Envelope - Control
LEQ
HEQ
EQ Trim
Chorus/Flanger
LFO: Tri / Sine
Paramter Value Explanation
Exciter
X Blend Blend –100...+100
Sets the intensity
(depth) of the Exciter
effect p.222
Frequency
Emphasis
Freq
0...70
Sets the frequency
range to be empha-
sized p.222
X EQ Trim ← 0...100
Sets the EQ input
level
X LEQ [dB]
Low EQ Gain
[dB]
–15...+15
Sets the gain of Low
EQ
HEQ [dB]
High EQ
Gain [dB]
–15...+15
Sets the gain of High
EQ
Chorus/Flanger
F LFO[Hz]
LFO Freq
[Hz]
0.02...20.00
Sets the speed of the
LFO
LFO
LFO
Waveform
Tri ( Triangle),
Sine
Selects the LFO
Waveform
F Depth Depth 0...100
Sets the depth of LFO
modulation
Dly[ms]
Delay Time
[ms]
0.0...109.0 Sets the delay time
F.back Feedback –100...+100
Sets the feedback
amount p.257
F Out Mode ←
Normal,
Wet Invert
Selects the output
mode for the chorus/
flanger p.218
F Wet/Dry
[Cho/Fln]
Wet/Dry
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Sets the effect
balance of the
chorus/flanger
p.226, p.257
Src
[Cho/Fln]
Source
Off...Tempo
Selects the Wet/Dry
modulation source
for the chorus/flanger
Amt
[Cho/Fln]
Amount
–100...+100
Sets the Wet/Dry
modulation amount
for the chorus/flanger
Wet/Dry ←
–Wet...
–99 : 1, Dry,
99 : 1...Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
+
Chorus/Flanger
Chorus/Flanger
Feedback
LFO: Tri / Sine
Cho/Flng Wet / Dry
Normal
Wet Invert
Output Mode
–
+
LEQ HEQ
EQ Trim
Exciter
Exciter