Single size effects 069: Multitap Cho/Delay (Multitap Chorus/Delay)
255
069: Multitap Cho/Delay (Multitap
Chorus/Delay)
This effect has four chorus blocks with a different LFO phase. You
can create a complex stereo image by setting each block’s delay
time, depth, output level, and pan individually. You can also fix
some of the chorus blocks to combine the chorus and delay effects.
070: Ensemble
This Ensemble effect has three chorus blocks that use LFO to
create subtle shimmering, and gives three dimensional depth and
spread to the sound, because the signal is output from the left,
right, and center.
Shimmer
This parameter sets the amount of shimmering of the LFO
waveform. Increasing this value adds more shimmering, making
the chorus effect more complex and richer.
Paramter Value Explanation
Tap1 [ms]
Tap1
Delay (000)
[ms]
0...110
Sets the Tap1 (LFO
phase=0 degrees)
delay time
Dep Tap1 Depth 0...30
Sets the Tap1 chorus
depth
Lvl Tap1 Level 0...30
Sets the Tap1 output
level
Pan Tap1 Pan
L6...L1, C,
R1...R6
Sets the Tap1 stereo
image
Tap2 [ms]
Tap2
Delay (180)
[ms]
0...110
Sets the Tap2 (LFO
phase=180 degrees)
delay time
Dep Tap2 Depth 0...30
Sets the Tap2 chorus
depth
Lvl Tap2 Level 0...30
Sets the Tap2 output
level
Pan Tap2 Pan
L6...L1, C,
R1...R6
Sets the Tap2 stereo
image
Tap3 [ms]
Tap3
Delay (090)
[ms]
0...110
Sets the Tap3 (LFO
phase=90 degrees)
delay time
Dep Tap3 Depth 0...30
Sets the Tap3 chorus
depth
Lvl Tap3 Level 0...30
Sets the Tap3 output
level
Pan Tap3 Pan
L6...L1, C,
R1...R6
Sets the Tap3 stereo
image
Tap4 [ms]
Tap4
Delay (270)
[ms]
0...110
Sets the Tap4 (LFO
phase=270 degrees)
delay time
Dep Tap4 Depth 0...30
Sets the Tap4 chorus
depth
Lvl Tap4 Level 0...30
Sets the Tap4 output
level
Pan Tap4 Pan
L6...L1, C,
R1...R6
Sets the Tap4 stereo
image
LFO [Hz]
LFO Freq
[Hz]
0.02...13.00
Sets the speed of the
LFO
Tap1 FB
Tap1
Feedback
–100...+100
Sets the Tap1
feedback amount
Src Source Off...Tempo
Selects the
modulation source of
Tap1 feedback
amount and effect
balance
Amt Amount –100...+100
Sets the Tap1
feedback amount and
modulation amount
LFO1
LFO2
Bi-Phase Modulation LFO
Depth1
Depth2
+
Left
Right
Feedback
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
+
Level
Level
Level
Level
Pan
Pan
Pan
Pan
LFO: Triangle
Tap1 Delay
Tap2 Delay
Tap3 Delay
Tap4 Delay
0 [degree]
180 [degree]
90 [degree]
270 [degree]
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Paramter Value Explanation
Speed ← 1...100
Sets the speed of the
LFO
Src Source Off...Tempo
Selects a modulation
source for LFO speed
Amt Amount –100...+100
Sets the modulation
amount of LFO speed
Depth ← 0...100
Sets the depth of LFO
modulation
Src Source Off...Tempo
Selects the
modulation source of
the LFO modulation
depth
Amt Amount –100...+100
Sets the modulation
amount of the LFO
modulation depth
Shimmer ← 0...100
Sets the amount of
shimmering of the
LFO waveform p.256
Wet/Dry ←
–Wet...
–99 : 1, Dry,
99 : 1...Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
LFO
Shimmer
+
Ensemble
Time
Level
Ensemble LFO
Shimmer
To Next Page
Loading...
Need help?
General
