Korg KROSS - CHANNEL (MIDI Channel)

7: C–DRUM TRACK 7–2: CHANNEL (MIDI Channel)
87
7–2: CHANNEL (MIDI Channel)
Input [Gch]
If the Trigger Mode is set to Wait KBD Trigger, you can control
the trigger by playing the keyboard on this MIDI channel.
In Combination mode, this Input is fixed at Gch.
Output [01...16, Gch]
This specifies the MIDI channel that will transmit the MIDI data
of the drum pattern. The drum pattern will trigger the program of
the timbre that is set to this same MIDI channel.
Gch: The data will be sent to the channel specified by the global
MIDI channel MIDI Channel setting (G–MIDI> BASIC).
Whether the pattern data will be output to an external device will
depend on the Status setting of the timbre that matches the
Output MIDI channel.
Timbre Info.
This shows the MIDI channels of timbres 1–16. Set “Output” to
the MIDI channel of the timbre that you want to play using the
Drum Track.
In this page, you can't use cursor buttons   to select
timbres.
V 7–1, 2: FUNCTION
•0: Write Combination, Write/Initialize Combination see page
94
•1: Solo Setting see page 63
•2: Compare see page 64
•3: Auto Song Setup see page 64
•4: Add to Favorite see page 94
•5: Copy from Program see page 95
•6: Copy Drum Track see page 96
For more information, please see the “Combination: FUNCTION”
section on page 94.