Effect Guide
238
037: Stereo Tremolo
This effect modulates the volume level of the input signal. The
effect is stereo, and offsetting the LFO of the left and right phases
from each other produces a tremolo effect between left and right.
LFO Waveform
This parameter sets the basic shape of the LFO. The Vintage
waveform models classic guitar-amp tremolo.
LFO Phase [deg]
This parameter determines the difference between the left and right LFO
phases. A higher value will simulate the auto-pan effect in which the
sound is panned between left and right.
038: TEXTREM (TEX Tremolo)
This models the highly-acclaimed tremolo circuit that was built
into a US-made combo amp. The Spread setting lets you create a
pan effect that wavers between left and right.
039: St. Env. Tremolo
(Stereo
Envelope Tremolo)
This effect uses the input signal level to modulate a stereo tremolo
effect (LFO volume modulation). For instance, you can create a
tremolo effect that becomes deeper and faster as the input gets
more quiet.
Paramter Value Explanation
LFO
LFO
Waveform
Tri (Triangle),
Sine, Vntage
(Vintage),
Up, Down
Selects the LFO
Waveform p.238
Shape
LFO
Shape
–100...+100
Changes the
curvature of the LFO
Waveform p.224
Phase
LFO
Phase [deg]
–180...+180
Sets the LFO phase
difference between the
left and right p.238
LFO [Hz]
LFO Freq
[Hz]
0.02...20.00
Sets the speed of the
LFO p.226
Src
LFO
Source
Off...Tempo
Selects a modulation
source for LFO speed
Amt
LFO
Amount
–20.00...
+20.00
Sets the modulation
amount of LFO speed
MIDI Sync
BPM/MIDI
Sync
Off, On
When this is on, the
LFO speed is set by
BPM, Base Note, and
Times, instead of
Frequency p.223
BPM ←
MIDI,
40.00...
300.00
MIDI syncs to the
system tempo; 40–
300 sets the tempo
manually for this
individual effect p.223
Base Note ← ...
Selects the type of
notes that specify the
LFO speed p.223
Times ← x1...x32
Sets the number of
notes that specify the
LFO speed p.223
Depth ← 0...100
Sets the depth of LFO
modulation
Src Source Off...Tempo
Selects the modulation
source of the depth of
modulation
Amt Amount –100...+100
Sets the modulation
amount of the depth
of modulation
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Phase
LFO: Tri/Sin/Vintage/Up/Down
LFO Shape
Tremolo
Tremolo
Tremolo - LFO Waveform
Triangle Sine Vintage Up Down
Paramter Value Explanation
Speed [Hz] ← 0.10...10.0
Sets the tremolo
speed
Depth ← 0...100
Select the tremolo
depth
Spread ← 0...100
Sets the width of the
stereo image of the
effect sound
Level Adjust ← 1...100 Sets the output level
Wet/Dry ←
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Paramter Value Explanation
Env Sens
Envelope
Sens
0...100
Sets the envelope’s
sensitivity to the
input signal
Env Shape
Envelope
Shape
–100...+100
Sets the envelope’s
curvature
LFO
LFO
Waveform
Tri (Triangle),
Sine, Vntage
(Vintage)
Selects the LFO
Waveform
Shape
LFO
Shape
–100...+100
Changes the
curvature of the LFO
Waveform p.224
Phaes
LFO
Phase [deg]
–180...+180
Sets the LFO phase
difference between
the left and right
p.238
LFO [Hz]
LFO Freq
[Hz]
0.02...20.00
Sets the speed of the
LFO p.239
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Spread
LFO
Tremolo
Tremolo
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Phase
LFO Shape
Envelope Sens
+
Envelope
LFO: Tri/Sin/Vintage
Envelope Shape
Tremolo
Tremolo
To Next Page
Loading...
