KROSS and MIDI CCs Responses to standard MIDI controllers
309
KROSS and MIDI CCs
Responses to standard MIDI
controllers
The following table shows how the KROSS responds to MIDI
control change messages, and the relation between settings and
controller movements on the KROSS.
CC# Control Value Function
0 Bank select (MSB) 0…127 bank select message MSB *1
1 Modulation 1 0…127 corresponds to modulation wheel movement aware from yourself
2 Modulation 2 0…127
for controlling Alternate Modulation Source (AMS: coresponds to JS-Y #02) or Effect Dynamic
Modulation (Src: JS-Y #02)
3– – –
4 Foot controller 0…127 corresponds to when the assignable pedal function is set to Foot Pedal
5 Portamento time 0…127 portamento time
6 Data entry (MSB) 0…127 MSB of RPN and NRPN data *2
7 Volume 0…127 volume *3
8 Post Insert Effect panpot 0…127 pan after the Insert Effect
9– – –
10 Panpot 0…127 pan
11 Expression 0…127 volume *3
12 Effect control 1 0…127 corresponds to effect dynamic control source FX Control1 (see page 316)
13 Effect control 2 0…127 corresponds to effect dynamic control source FX Control2 (see page 316)
14 ARP ON/OFF control
0…63(Off),
64…127(On)
equivalent to on/off when CC#14 is assigned to the
ARP buttons *7
15 – – –
16 Controller (CC#16) 0…127
for controlling Alternate Modulation Source (AMS: coresponds to CC#16)
or Effect Dynamic Modulation (Src: oresponds to CC#16)
17...21 – – –
22 ARP–GATE control 0…127 equivalent to when CC#22 is assigned to arpeggio control 1 (GATE) *7
23 ARP–VELOCITY control 0…127 equivalent to when CC#23 is assigned to arpeggio control 2 (VELOCITY) *7
24 ARP–SWING control 0…127 equivalent to when CC#24 is assigned to arpeggio control 3 (SWING) *7
26…31 – – –
32 Bank select (LSB) 0…127 LSB of bank select message *1
33…37 – – –
38 Data entry (LSB) 0…127 LSB of RPN or NRPN data *2
39…63 – – –
64 Damper 0…127 damper effect
65 Portamento On/Off
0…63(Off),
64…127(On)
turn the portamento effect on/off
66 Sostenuto On/Off
0…63(Off),
64…127(On)
turn the sostenuto effect on/off
67 Soft 0…127 soft pedal effect
68…69 – – –
70 Sustain level 0…127 sustain levels of the filter EG and amp EG *4
71 Filter resonance level 0…127 resonance level of the filter *4
72 Release time 0…127 cutoff frequency of the high pass filter *4
73 Attack time 0…127 release times of the filter EG and amp EG *4
74 Filter cutoff frequency 0…127 cutoff frequency of the low pass filter *4
75 Decay time 0…127 decay times/slope times of the filter EG and amp EG *4
76 LFO1 speed 0…127 LFO1 speed *4
77 LFO1 depth 0…127 pitch LFO1 intensity *4
78 LFO1 delay 0…127 LFO1 delay *4
79 Filter EG intensity 0…127 filter EG intensity *4
80 SW1 modulation On/Off
0…63(Off),
64…127(On)
corresponds to on/off when the SW1 function is set to SW1 Mod.
81 SW2 modulation On/Off
0…63(Off),
64…127(On)
corresponds to on/off when the SW2 function is set to SW2 Mod.
82 Foot switch On/Off
0…63(Off),
64…127(On)
corresponds to on/off when the function of the assignable foot switch is set to Foot
SW
83 Controller (CC#83) 0…127 for controlling AMS or Dmod
84 – – –
To Next Page
Loading...
