0: SEQ 0–5: ARP (Arpeggiator)
111
0–5: ARP (Arpeggiator)
Here you can adjust arpeggiator settings for the song. A song can
run two arpeggiators simultaneously.
Arpeggiator parameters can be edited in S–ARP, but certain major
parameters can be edited in these pages as well.
You can also control the arpeggiator in real time by using the
KNOB 1 (TEMPO) knob and SWITCH (TAP) button in the
TEMPO row of REALTIME CONTROLS or [GATE],
[VELOCITY], and [SWING].
MOD (Modulation)
[GATE] [–64...+00...+63]
Specifies the length (gate time) of each note in the arpeggio. (see
page 51)
[VEL] (Velocity) [–64...+00...+63]
Specifies the velocity of the notes in the arpeggio. (see page 51)
[SWING] [–64...+00...+63]
This parameter shifts the timing of the odd-numbered notes of the
arpeggio. (see page 52)
A, B (Arpeggiator A, B)
Arpeggiator Run A, B [Off, On]
When the ARP button is on, the arpeggiator(s) you checked here
will run if they are assigned to a timbre by Arpeggiator Assign
(S–ARP> ASSIGN.)
When the arpeggiator is on, these check boxes let you turn A and
B on/off.
This parameter can also be set from S–ARP page Arpeggiator
Run A, B.
Track assign
This indicates the arpeggiator A and B assignment status for each
track 1–8. These settings are made in Arpeggiator Assign (S–
ARP>ASSIGN).
Pat (Pattern)
[Preset: UP...RANDOM, 0000...1027]
Octave [1oct, 2oct, 3oct, 4oct]
Resolution [
, , , , , , , ]
Sort [Off, On]
Lat (Latch) [Off, On]
Sync (Key Sync.) [Off, On]
Kbd (Keyboard) [Off, On]
Set the various parameters of the combination arpeggiator.
These parameters can also be set from S–ARP pages.
For more information, please see the “7: S–ARP (Arpeggiator)”
section on page 125.
0–1...5: FUNCTION
•0: Memory Status see page 137
•1: Solo Setting see page 63
•2: Undo see page 137
•3: Create New Song see page 137
•4: Rename Song see page 137
•5: Delete Song see page 137
•6: Copy From Song see page 137
•7:
Copy from Combination
see page 138
•8: Copy from Program see page 139
•9: Load Template Song see page 139
•10: Save Template Song (Save as User Template Song) see
page 140
•11: GM Initialize see page 141
•12: FF/REW Speed see page 142
•13: Set Location (Set Location for Locate Key) see page
142
•14: Copy Arpeggiator see page 150
For more information, please see the “Sequencer: FUNCTION”
section on page 137.
To Next Page
Loading...
Need help?
General
