Single size effects 049: Comp - P4EQ (Compressor - Parametric 4-Band EQ)
247
053: Exciter - Comp (Exciter -
Compressor)
This effect combines a mono exciter and a compressor. You can
change the order of the effects.
054: Exciter - Limiter
This effect combines a mono exciter and a limiter. You can change
the order of the effects.
Paramter Value Explanation
Exciter
X Blend Blend –100...+100
Sets the intensity
(depth) of the Exciter
effect p.222
Frequency
Emphasis
Frequency
0...70
Sets the frequency
range to be empha-
sized p.222
X EQ Trim Pre EQ Trim 0...100
Sets the EQ input
level
X LEQ [dB]
Low EQ Gain
[dB]
–15...+15
Sets the gain of Low
EQ
HEQ [dB]
High EQ
Gain [dB]
–15...+15
Sets the gain of High
EQ
Compressor
C Sens Sensitivity 1...100
Sets the sensitivity
p.217
C Attack Attack 1...100
Sets the attack level
p.217
OutLevel ← 0...100
Sets the compressor
output level p.217
Routing ←
Exciter→
Comp,
Comp →
Exciter
Switches the order of
the exciter and
compressor
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Routing
Compressor
LEQ HEQ
EQ Trim
Comp
Output Level
Envelope - Control
Exciter
Exciter
Paramter Value Explanation
Exciter
X Blend Blend –100...+100
Sets the intensity
(depth) of the Exciter
effect p.222
Frequency
Emphasis
Freq
0...70
Sets the frequency
range to be
emphasized p.222
X EQ Trim Pre EQ Trim 0...100
Sets the EQ input
level
X LEQ [dB]
Low EQ Gain
[dB]
–15...+15
Sets the gain of Low
EQ
HEQ [dB]
High EQ
Gain [dB]
–15...+15
Sets the gain of High
EQ
Limiter
L Ratio Ratio
1.0 : 1...
50.0 : 1, Inf : 1
Sets the signal
compression ratio
p.218
Thrsh[dB]
Threshold
[dB]
–40...0
Sets the level above
which the
compressor is applied
p.218
L Attack Attack 1...100 Sets the attack time
Release Release 1...100 Sets the release time
L Gain [dB]
Gain Adjust
[dB]
–Inf,
–38...+24
Sets the limiter
output gain p.218
Routing ←
Exciter →
Limiter,
Limiter →
Exciter
Switches the order of
the exciter and limiter
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Routing
LEQ HEQ
EQ Trim
Exciter
Exciter
Limiter
Limiter
Gain Adjust
Envelope - Control