Program mode
30
Break [–99...+99]
This controls the depth and direction of the AMS modulation for
the Break level.
EG Display
This shows the shape of the EG that's specified by the P–FILTER
EG settings. The location of the selected parameter is also shown.
7–3: T-MOD (Time Modulation)
These settings let you use three different AMS sources to control
the Time parameters of the EG. For each of the three AMS sources,
the Attack, Decay, Slope, and Release times each have their own
modulation intensities.
Filter EG Time Modulation
OSC (Oscillator Select) [1, 2]
Select the oscillator (1 or 2) that you want to edit.
Note: Oscillator 2 can be selected if Oscillator Mode is set to
Double.
AMS1
AMS1 [List of AMS Sources]
Selects the first AMS source to control the EG’s Time parameters.
Velocity and Keyboard Track can both be useful here for instance.
For a list of AMS sources, please see “AMS (Alternate
Modulation Source) List” on page 292.
Attack [–99...+99]
This controls the depth and direction of the AMS modulation for
the Attack time.
For example, if you set the AMS source to Velocity and set At
(Attack) to +99, the Attack time will get much longer at higher
velocities. If you instead set At (Attack) to –99, the Attack time
will get much shorter at higher velocities.
When the AMS source is at its maximum value for instance, when
Velocity is at 127 a setting of +8 will make the Attack time almost
twice as long, and a setting of –8 will cut the Attack time almost in
half. (see page 294)
Decay [–99...+99]
This controls the depth and direction of the AMS modulation for
the Decay time.
Slope [–99...+99]
This controls the depth and direction of the AMS modulation for
the Slope time.
Release [–99...+99]
This controls the depth and direction of the AMS modulation for
the Release time.
AMS2 and AMS3
These select the second and third AMS sources, respectively, for
controlling the EG’s Time parameters. Each has its own intensities
Note-on Note-on Note-on
AMS=Velocity, Intensity = a positive (+) value
“Attack”=+, “Decay”=+,
“Slope”=+, “Release”=+
Softly played note.
Original Shape
“Attack”=+, “Decay”=+,
“Slope”=+, “Release”=+
Stongly played note.
Times are longer.
Reaches Sustain more
slowly.
“Attack”=–, “Decay”=–,
“Slope”=–, “Release”=–
Stongly played note.
Times are shorter.
Reaches Sustain more
quickly.
To Next Page
Loading...
Need help?
General
