Single size effects 063: Rotary Speaker
251
062: Organ Vib/Chorus (Organ
Vibrato/Chorus)
This effect simulates the chorus and vibrato circuitry of a vintage
organ. The modulation speed and depth can be customized.
Control Mode
Preset Type
Custom Mix
Custom Depth
Custom Speed
If Control Mode=Preset, you can use Preset Type to select the
effect. In this case, the Custom Mix/Depth/Speed settings are
ignored. If Control Mode=Custom, the Custom Mix/Depth/
Speed settings are valid, and the Preset Type setting is ignored.
Amount
If Preset Type=V1 and Source=M.Whl #1, setting this to +5 and
moving the modulation wheel away from yourself will control the
setting in the order of V1→C1→V2→C2→V3→C3.
063: Rotary Speaker
This effect simulates a rotary speaker, and obtains a more realistic
sound by simulating the rotor in the low range and the horn in the
high range separately. The effect also simulates the stereo
microphone settings.
Paramter Value Explanation
Mode
Control
Mode
Preset, Cstm
(Custom)
Selects either preset
or custom settings
p.251
Input Trim ← 0...100 Sets the input level
Preset Preset Type
V1, C1, V2,
C2, V3, C3
Selects the effect type
when Mode=Preset
V1/V2/V3 are varia-
tions of vibrato, and
C1/C2/C3 are varia-
tions of chorus p.251
Src Source Off...Tempo
Selects the
modulation source
that will change the
effect type
Amt Amount –5...+5
Sets the modulation
amount for changing
the effect type p.251
Cstm Mix Custom Mix
Vibrato,
1:99...99:1,
Chorus
Sets the mix level of
the direct sound
when Mode=Preset
p.251
Src Source Off...Tempo
Selects the
modulation source
that will control the
mix level of the direct
sound
Amt Amount –100...+100
Sets the modulation
amount for
controlling the mix
level of the direct
sound
Cstm Dep
Custom
Depth
0...100
Sets the vibrato
depth p.251
Src Source Off...Tempo
Selects the
modulation source
that will control
vibrato depth
Amt Amount –100...+100
Sets the modulation
amount for
controlling the
vibrato depth
Cstm Spd
Custom
Speed[Hz]
0.02...20.00
Sets the vibrato
speed p.251
Src Source Off...Tempo
Selects the
modulation source
for controlling the
vibrato speed
Amt Amount
–20.00...
+20.00
Sets the modulation
amount for
controlling the
vibrato speed
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
+
Vibrato/Chorus
Mode
Preset Setting
Custom Parameters
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Paramter Value Explanation
Mode SW Mode Rotate, Stop
Switches between
speaker rotation and
stop
Src Source Off...Tempo
Selects a modulation
source for Rotate/
Stop
Sw Switch Mode
Tog gle,
Moment
Sets the switch mode
for Rotate/Stop
modulation p.252
Speed Sw
Speed
Switch
Slow, Fast
Switches the speaker
rotation speed
between slow and
fast p.252
Src Source Off...Tempo
Selects a modulation
source for Slow/Fast
Sw Switch Mode
Tog gle,
Moment
Sets the switch mode
for Slow/Fast
modulation p.252
H/R Bal H/R Balance
Rotor, 1...99,
Horn
Sets the level balance
between the high-
frequency horn and
low-frequency rotor
Manu Spd
Ctl
Manual
Speed
Off...Tempo
Sets a modulation
source for direct
control of rotation
speed p.252
Horn Accel
Horn
Acceleration
0...100
How quickly the horn
rotation speed in the
high range is
switched p.252
Horn Ratio ←
Stop,
0.50...2.00
Adjusts the (high-
range side) horn
rotation speed.
Standard value is
1.00. Selecting “Stop”
will stop the rotation
Rotor Accel
Rotor
Acceleration
0...100
Determines how
quickly the rotor
rotation speed in the
low range is switched
p.252
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
D
-mod
D
-mod
D
-mod
Mode Switch: Rotate/Stop
Speed Switch: Slow/Fast
Manual Speed Control
Speaker Simulation
Mic Distance
Mic Spread
Horn/Rotor
Balance
Horn
Rotary Speaker
Rotor
+
To Next Page
Loading...
