Korg KROSS - Exciter - Mt.delay (Exciter - Multitap Delay)

Effect Guide
280
117: Exciter - Mt.Delay (Exciter -
Multitap Delay)
This effect combines a mono exciter and a multitap delay.
118: OD/HG - Mt.Delay ( Overdrive/
Hi.Gain - Multitap Delay)
This effect combines a mono overdrive/high-gain distortion and a
multitap delay.
Paramter Value Explanation
Exciter
X Blend Blend –100...+100
Sets the intensity
(depth) of the Exciter
effect p.222
Frequency
Emphasis
Frequency
0...70
Sets the frequency
range to be empha-
sized p.222
X EQ Trim Pre EQ Trim 0...100
Sets the EQ input
level
X LEQ
Low EQ Gain
[dB]
–15...+15
Sets the gain of Low
EQ
X HEQ
High EQ
Gain [dB]
–15...+15
Sets the gain of High
EQ
Multitap Delay
DT1[ms]
Tap1
Time [ms]
0.0...1360.0
Sets the Tap1 delay
time
Tap1 Level ← 0...100
Sets the Tap1 output
level
p.267
D T2 [ms] Tap2 Time 0.0...1360.0
Sets the Tap2 delay
time
Fback(T2)
Feedback
(Tap2)
–100...+100
Sets the Tap2
feedback amount
HiDamp [%]
High Damp
[%]
0...100
Sets the damping
amount in the high
range p.266
D W/D [Dly]Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the multitap
delay effect balance
Src [Dly]Source Off...Tempo
Selects the Wet/Dry
modulation source
for the multitap delay
Amt [Dly]Amount –100...+100
Sets the Wet/Dry
modulation amount
for the multitap delay
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Multitap Delay
Feedback
High Damp
Delay
(2)
(1)
Mt.Dly Wet / Dry
LEQ HEQ
EQ Trim
Exciter
Exciter
Paramter Value Explanation
Overdrive/Hi-Gain
O Mode Drive Mode
Overdrive,
Hi-Gain
Switches between
overdrive and high-
gain distortion
Drive ← 1...100
Sets the degree of
distortion p.230
O Out Level Level 0...50
Sets the overdrive
output level p.230
Src Source Off...Tempo
Selects the
modulation source
for the overdrive
output level
Amt Amount –50...+50
Sets the modulation
amount of the
overdrive output level
O Low [Hz]
Low Cutoff
[Hz]
20...1.00k
Sets the center
frequency for Low EQ
(shelving type)
Gain
Low Gain
[dB]
–18...+18
Sets the gain of Low
EQ
O Mid 1[Hz]
Mid1 Cutoff
[Hz]
300...10.00k
Sets the center
frequency for Mid/
High EQ 1 (peaking
type)
Q Mid1 Q 0.5...10.0
Sets the band width
of Mid/High EQ 1
p.221
Gain
Mid Gain
[dB]
–18...+18
Sets the gain of Mid/
High EQ 1
O Mid22[Hz]
Mid2 Cutoff
[Hz]
500...20.00k
Sets the center
frequency for Mid/
High EQ 2 (peaking
type)
Q Mid2 Q 0.5...10.0
Sets the band width
of Mid/High EQ 2
p.221
O Mid2 [dB]
Mid2 Gain
[dB]
–18...+18
Sets the gain of Mid/
High EQ 2
Multitap Delay
DT1[ms]
Tap1
Time [ms]
0.0...549.0
Sets the Tap1 delay
time
DT1 Level Tap1 Level 0...100
Sets the Tap1 output
level p.267
DT2 [ms]
Tap2
Time [ms]
0.0...549.0
Sets the Tap2 delay
time
D F.back
Feedback
(Tap2)
–100...+100
Sets the Tap2
feedback amount
HiDamp [%]
High Damp
[%]
0...100
Sets the damping
amount in the high
range p.266
D W/D [Dly]Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the multitap
de
lay effect balance
Src [Dly]Source Off...Tempo
Selects the Wet/Dry
modulation source
for the multitap delay
Amt [Dly]Amount –100...+100
Sets the Wet/Dry
modulation amount
for the multitap delay
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Multitap Delay
Feedback
High Damp
Delay
(2)
(1)
Mt.Dly Wet / Dry
Overdrive / Hi-Gain
3 Band PEQ
Output Level
Mode: Overdrive / Hi-Gain
Drive
Driver