Korg KROSS - IFX5 (Insert Effect5)

11: C-MFX (Master Effect) 10–2: IFX2 (Insert Effect2), 10–3: IFX3 (Insert Effect3), 10–4: IFX4 (Insert Effect4), 10–5: IFX5
93
10–2: IFX2 (Insert Effect2),
10–3: IFX3 (Insert Effect3),
10–4: IFX4 (Insert Effect4),
10–5: IFX5 (Insert Effect5)
Here you can edit the effect parameters for insert effects 2–5
selected in the C–FX ROUTING> IFX page.
For more information, please see “10–1: IFX1 (Insert Effect1)”
above.
V 10–1...5: FUNCTION
•0: Write Combination, Write/Initialize Combination see page
94
•1: Solo Setting see page 63
•2: Compare see page 64
•3: Auto Song Setup see page 64
•4: Add to Favorite see page 94
•5: Copy from Program see page 95
•6: Copy Insert Effect see page 66
•7: Swap Insert Effect see page 66
For more information, please see the “Combination: FUNCTION”
section on page 94.
11: C-MFX (Master Effect)
Here you can adjust settings for the master effects. For instance,
you can:
• Select the master effects.
• Route a sound to the master effects.
• Create detailed settings for the master effects.
For more information, please see “Effect Guide” on page 207.
11–1: SETUP
• Here you can specify the type of master effects used for 1, 2 and
turn them on/off.
• The master effects are sent to the L/R bus.
1 (MFX1)
Effect On/Off [Off, On]
Effect Select [000, S1...S87, D00...D13]
Return 1 [000...127]
Chain On/Off [Off, On]
Chain Level [000...127]
2 (MFX2)
Effect On/Off [Off, On]
Effect Select [000, S1...S87, D00...D13]
Return 2 [000...127]
These parameters are the same as in Program mode.
For more information, please see the “18–2: MFX1 (Master Effect
1)” section on page 62.
Eect On/O
Eect On/O