Single size effects 030: SmallPHASE (Small Phaser)
235
Resonance
Wet/Dry
The peak shape of the positive and negative Feedback value is
different. The harmonics will be emphasized when the effect
sound is mixed with the dry sound, if you set a positive value for
both “Resonance” and “Wet/Dry,” and if you set a negative value
for both “Resonance” and “Wet/Dry.”
High Damp [%]
This parameter sets the amount of damping of the resonance in the
high range. Increasing the value will cut high-range harmonics.
030: SmallPHASE (Small Phaser)
This models a classic phaser that was born in New York during the
1970s. With a warm, rich tone, it is also loved by many electric
piano players.
Color
This lets you choose between two types of phaser sound. Turning
this On produces a deeper phase shift effect with a distinctive
modulation.
031: Orange PHASE (Orange
Phaser)
This models a standard model of analog phaser that achieved great
popularity. It gives a sense of movement to electric piano sounds,
adding a rich-sounding phase shift effect.
032: Black PHASE (Black Phaser)
This models a Danish-made four-stage phaser that featured a wide
range.
033: U-VIBE
This models a famous chorus/vibrato pedal effect. Simulating a
rotary speaker, this effect produced a fascinatingly lush tone.
Src Source Off...Tempo
Selects the
modulation source
for the LFO
modulation depth
Amt Amount –100...+100
Sets the modulation
amount of the LFO
modulation depth
Resonance ← –100...+100
Sets the resonance
amount p.235
HiDamp[%]
High Damp
[%]
0...100
Sets the resonance
damping amount in
the high range p.235
Manual ← 0...100
Sets the frequency
where the effect is
applied
Src Source Off...Tempo
Selects the
modulation source
for the LFO
modulation
Amt Amount –100...+100
Sets the modulation
amount of the LFO
modulation
Wet/Dry ←
–Wet...
–99 : 1, Dry,
99 : 1...Wet
Sets the balance
between the effect
and the dry input
p.226, p.235
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Paramter Value Explanation
Speed [Hz] ← 0.10...10.0
Sets the speed of the
LFO
Color ← Off, On
Switches the tone of
the phaser sound
p.235
Wet/Dry ←
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Sets the balance
between the effect
and the dry input
p.226, p.235
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Phaser
LFO
Color
Paramter Value Explanation
Speed [Hz] ← 0.10...10.0
Sets the speed of the
LFO
Depth ← 0...100
Sets the depth of LFO
modulation
Manual ← 1...100
Sets the frequency
where the effect is
applied
Resonance ← 0...100
Sets the resonance
amount
Wet/Dry ←
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Paramter Value Explanation
Speed [Hz] ← 0.10...10.0
Sets the speed of the
vibration
Depth ← 0...100
Sets the depth of
vibration
Mix ← 0...100
Sets the effect mix
level
Wet/Dry ←
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Sets the balance
between the effect
and the dry input
p.236
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Phaser
LFO
Resonance
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
U-VIBE
LFO
Mix
To Next Page
Loading...
Need help?
General
