Single size effects 078: Doppler
259
077: St. Auto Fade Mod. (
Stereo Auto
Fade Modulation)
This stereo chorus/flanger effect enables you to control the LFO
speed and effect balance using auto fade, and you can spread the
sound by offsetting the phase of the left and right LFOs from each
other.
078: Doppler
This effect simulates the “Doppler effect” of a moving sound with
a changing pitch, similar to the siren of a passing ambulance.
Mixing the effect sound with the dry sound will create a unique
chorus effect.
LFO Mode
Source
LFO Sync
The “LFO Mode” parameter switches LFO operation mode. When
Loop is selected, the Doppler effect will be created repeatedly. If
“LFO Sync” is set to On, the LFO will be reset when the
Paramter Value Explanation
AUTOFADE
AUTOFADE
Source
Off...Tempo
Selects the
modulation source
that starts AutoFade
p.259
Fade-In[ms]
Fade-In
Delay [ms]
00...2000
Sets the fade-in delay
time p.259
Fade-In Rate ← 1...100
Sets the rate of fade-
in p.259
LFO Mod
LFO Freq
Mod
Dmod,
AUTOFADE
Switches between
Dmod and
AUTOFADE for the
LFO frequency
modulation p.259
W/D Mod
Wet/Dry
Mod
Dmod,
AUTOFADE
Switches between
Dmod and
AUTOFADE for the
effect balance
modulation p.259
LFO
LFO
Waveform
Tri (Triangle),
Sine
Selects the LFO
Waveform
Shape LFO Shape –100...+100
Changes the
curvature of the LFO
Waveform p.224
Phase Phase [deg] –180...+180
Sets the LFO phase
difference between
the left and right
p.226
LFO [Hz]
LFO Freq
[Hz]
0.02...20.00
Sets the speed of the
LFO
Src Source Off...Tempo
Selects a modulation
source for LFO speed
Amt Amount
–20.00...
+20.00
Sets the modulation
amount of LFO speed
Depth ← 0...100
Sets the depth of LFO
modulation
L Dly[ms]
Mod Delay
L Delay Time
[ms]
0.0...45.0
Sets the left channel
delay time
R Dly[ms]
Mod Delay
R Delay Time
[ms]
0.0...45.0
Sets the right channel
delay time
Feedback ← –100...+100
Sets the feedback
amount p.257
HiDamp [%]
High Damp
[%]
0...100
Sets the feedback
damping amount in
the high range
p.257
Wet/Dry ←
–Wet...
–99 : 1,
Dry,
99 : 1...Wet
Sets the balance
between the effect
and the dry input
p.226, p.257
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
AutoFade
LFO Frequency
Wet / Dry
Delay
Delay
Left
Right
Feedback
LFO Shape
LFO Phase
LFO: Tri / Sine
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out
Paramter Value Explanation
LFO Mode ← Loop, 1-Shot
Switches LFO
operation mode
p.260
Sync LFO Sync Off, On
Switches between
LFO reset on and off
when LFO Mode is set
to Loop p.260
Src Source Off...Tempo
Selects the
modulation source of
LFO reset p.260
LFO [Hz]
LFO Freq
[Hz]
0.02...20.00
Sets the speed of the
LFO p.226
Src Source Off...Tempo
Selects a modulation
source for LFO speed
Amt Amount
–20.00...
+20.00
Sets the modulation
amount of LFO speed
MIDI Sync
BPM/MIDI
Sync
Off, On
When this is on, the
LFO speed is set by
BPM, Base Note, and
Times, instead of
Frequency p.223
BPM ←
MIDI,
40.00...
300.00
MIDI syncs to the
system tempo; 40–
300 sets the tempo
manually for this
individual effect p.223
Base Note ← ...
Selects the type of
notes that specify the
LFO speed p.223
Times ← x1...x32
Sets the number of
notes that specify the
LFO speed p.223
PitchDepth Pitch Depth 0...100
Sets the pitch
variation of the
moving sound p.260
Src Source Off...Tempo
Selects the
modulation source of
pitch variation
Amt Amount –100...+100
Sets the modulation
amount of pitch
variation
Pan Depth ← –100...+100
Sets the panning of
the moving sound
p.260
Src Source Off...Tempo
Selects the
modulation source of
panning
Amt Amount –100...+100
Sets the modulation
amount of panning
Wet/Dry ←
Dry,
1 : 99...99 : 1,
Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Pan Depth
D
-mod
+
Trigger
LFO Mode = 1-Shot
Doppler
LFO
To Next Page
Loading...
