Effect Guide
256
071: Polysix Ensemble
This models the ensemble effect built into the classic Korg
PolySix programmable polyphonic synthesizer.
072: Stereo Flanger
This effect gives a significant swell and movement of pitch to the
sound. It is more effective when applied to a sound with a lot of
harmonics. This is a stereo flanger. You can add spread to the
sound by offsetting the phase of the left and right LFOs from each
other.
Feedback
Wet/Dry
The peak shape of the positive and negative “Feedback” value is
different. The harmonics will be emphasized when the effect
sound is mixed with the dry sound if you set a positive value for
both “Feedback” and “Wet/Dry,” and if you set a negative value
for both “Feedback” and “Wet/Dry.”
High Damp [%]
This parameter sets the amount of damping of the feedback in the
high range. Increasing the value will cut high-range harmonics.
073: Vintage Flanger
This models a classic analog flanger. It is highly effective for
playing chords on clavi-type keyboards or electric piano.
Paramter Value Explanation
Depth ← 0...100
Sets the depth of the
effect
Src Source Off...Tempo
Selects the
modulation source
that will control the
effect depth
Amt Amount –100...+100
Sets the amount by
which the effect
depth will be
modulated
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Paramter Value Explanation
LFO
LFO
Waveform
Tri (Triangle),
Sine
Selects the LFO
Waveform
Shape LFO Shape –100...+100
Changes the
curvature of the LFO
Waveform p.224
Phase Phase [deg] –180...+180
Sets the LFO phase
difference between
the left and right
p.226
LFO [Hz]
LFO Freq
[Hz]
0.02...20.00
Sets the speed of the
LFO p.226
Src Source Off...Tempo
Selects a modulation
source for LFO speed
Amt Amount
–20.00...
+20.00
Sets the modulation
amount of LFO speed
MIDI Sync
BPM/MIDI
Sync
Off, On
When this is on, the
LFO speed is set by
BPM, Base Note, and
Times, instead of
Frequency p.223
BPM ←
MIDI,
40.00...
300.00
MIDI syncs to the
system tempo; 40–
300 sets the tempo
manually for this
individual effect p.223
+
Polysix
Ensemble
Le ft
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Flanger
Flanger
Left
Right
Feedback
LFO Shape
LFO Phase
LFO: Tri / Sine
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out
Base Note ← ...
Selects the type of
notes that specify the
LFO speed p.223
Times ← x1...x32
Sets the number of
notes that specify the
LFO speed p.223
Depth ← 0...100
Sets the depth of LFO
modulation
Delay[ms]
Delay Time
[ms]
0.0...50.0
Sets the delay time
from the original
sound
Feedback ← –100...+100
Sets the feedback
amount p.257
HiDamp [%]
High Damp
[%]
0...100
Sets the feedback
damping amount in
the high range
p.257
Wet/Dry ←
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Sets the balance
between the effect
and the dry input
p.226, p.257
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Paramter Value Explanation
Speed [Hz] ← 0.10...10.0 Sets the speed of LFO
Manual ← 1...100
Sets the sweep
frequency
Depth ← 0...100
Sets the depth of LFO
modulation
Resonance ← 0...100
Sets the resonance
amount
LFO Reset
LFO Reset
Source
Off...Tempo Selects a modulation
source for LFO reset
Reset Offset ← 0...100 Sets the offset
Wet/Dry ←
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Flanger
LFO
Feedback
LFO Sync
Reset Offset
To Next Page
Loading...
