Korg KROSS - St. Phaser+Trml (Stereo Phaser + Tremolo)

Effect Guide
240
041: St. Phaser+Trml (Stereo
Phaser + Tremolo)
This effect combines a stereo phaser and tremolo, with linked
LFOs. Swelling phaser modulation and tremolo effects
synchronize with each other, creating a soothing modulation effect
particularly suitable for electric piano.
Type
LFO Phase [deg]
Select the type of phaser LFO and tremolo LFO for the “Type”
parameter. How the effect sound moves or rotates depends on the
type of LFO. Selecting “LFO Phase” enables you to offset the
timing of the phaser peak and control a subtle movement and
rotation of the sound.
Phaser Wet/Dry
Wet/Dry
“(Phaser) Wet/Dry” sets the balance between the phaser output and
the dry sound. “(OUTPUT) Wet/Dry” sets the balance between the
final phaser and tremolo output level and the dry sound.
Paramter Value Explanation
Type
LFO Phase
Type
Phs-Trml,
Phs-Spin,
Phs-T LR,
P LR-Trml,
P LR-Spin,
P LR-T LR
Selects the type of
the tremolo and
phaser LFOs p.240
Phaser - Tremolo,
Phaser - Tremolo
Spin,
Phaser - Tremolo LR,
Phaser LR - Tremolo,
Phaser LR - Tremolo
Spin, Phaser LR -
Tremolo LR
LFO Phase
[deg]
← –180...+180
Sets the phase
difference between
the tremolo and
phaser LFOs p.240
LFO [Hz]
LFO Freq
[Hz]
0.02...20.00
Sets the speed of the
LFO p.226
Src Source Off...Tempo
Selects a modulation
source for LFO speed
Amt Amount
–20.00...
+20.00
Sets the LFO speed
modulation amount
MIDI Sync
BPM/MIDI
Sync
Off, On
When this is on, the
LFO speed is set by
BPM, Base Note, and
Times, instead of
Frequency p.223
BPM ←
MIDI,
40.00...
300.00
MIDI syncs to the
system tempo; 40–
300 sets the tempo
manually for this
individual effect p.223
Base Note ← ...
Selects the type of
notes that specify the
LFO speed p.223
Times ← x1...x32
Sets the number of
notes that specify the
LFO speed p.223
Phs Depth
Phaser
Depth
0...100
Sets the phaser
modulation depth
Src Source Off...Tempo
Selects the
modulation source
for the phaser
modulation depth
Amt Amount –100...+100
Sets the modulation
amount for the
phaser modulation
depth
L-In
Left
Center
Right
Output Stereo Image
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
LFO Phase = 0 degrees LFO Phase = 90 degrees LFO Phase = 180 degrees
Stereo Auto Pan - LFO Phase
Phaser
Phaser
Left
Right
Resonance
LFO Type
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Phaser Wet / Dry
Phaser Wet / Dry
LFO
LFO Phase
LFO Shape
Tremolo
Tremolo
Phs Manu
Phaser
Manual
0...100
Sets the phaser
frequency range
Phs Reso
Phaser
Resonance
–100...+100
Sets the phaser
resonance amount
Phs W/D
Phaser
Wet/Dry
-Wet...-2:98,
Dry, 2:98...Wet
Sets the balance
between the phaser
effect and dry sounds
p.240
Trml Shape
Tremolo
Shape
–100...+100
Sets the degree of the
tremolo LFO shaping
Trml Depth
Tremolo
Depth
0...100
Sets the tremolo
modulation depth
Src Source Off...Tempo
Selects the
modulation source
for the tremolo
modulation depth
Amt Amount –100...+100
Sets the modulation
amount of the
tremolo modulation
depth
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
p.240
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry