Effect Guide
222
009: Stereo Exciter
This effect is a combination of the Exciter.
Exciter Blend
This parameter sets the depth (intensity) of the Exciter effect.
Positive values give a frequency pattern (to be emphasized)
different from negative values.
Emphasis Freq
This parameter sets the frequency to be emphasized. Higher values
will emphasize lower frequencies.
010: Stereo Isolator
This is a stereo effect that separates the input signal into low, mid,
and high-frequency bands, and controls the volume of each band
independently. For example you can separately boost or cut the
kick, snare, and hi-hat sounds from a drum signal in realtime.
Paramter Value Explanation
Blend Exciter Blend –100...+100
Sets the intensity
(depth) of the Exciter
effect p.222
Src Source Off...Tempo
Selects the
modulation source of
the Exciter intensity
Amt Amount –100...+100
Sets the modulation
amount of the Exciter
intensity
Frequency
Emphasis
Freq
0...70
Sets the frequency to
be emphasized p.222
Src Source Off...Tempo
Selects the
modulation source of
the frequency to be
emphasized
Amt Amount –70...+70
Sets the amount of
modulation of the
frequency to be
emphasized
PreEQ Trim EQ Trim 0...100
Sets the 2-band EQ
input level
Pre LEQ Fc
Low EQ
Frequency
Low,
Mid-Low
Selects the cutoff
frequency (low or
mid-low) of the low-
range equalizer
Pre HEQ Fc
High EQ
Frequency
High,
Mid-High
Selects the cutoff
frequency (high or
mid-high) of the
high-range equalizer
LEQ [dB]
Low EQ Gain
[dB]
–15.0...+15.0
Sets the gain of the
Low EQ
HEQ [dB]
High EQ
Gain [dB]
–15.0...+15.0
Sets the gain of the
High EQ
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
EQ Trim
LEQ HEQ
EQ Trim
D
-mod
Exciter
Exciter
Paramter Value Explanation
Low G[dB]
Low
Gain [dB]
–Inf,
–59...+12
Sets the low-
frequency gain
Src
Low
Source
Off...Tempo
Selects the source
that will modulate
low-frequency gain
Amt
Low
Amount
–72...+72
Sets the amount by
which the low-
frequency gain will
be modulated
Mid G[dB]
Mid
Gain [dB]
–Inf,
–59...+12
Sets the mid-
frequency gain
Src
Mid
Source
Off...Tempo
Selects the
modulation source
for mid-frequency
gain
Amt
Mid
Amount
–72...+72
Sets the amount by
which the mid-
frequency gain will
be modulated
High G[dB]
High
Gain [dB]
–Inf,
–59...+12
Sets the high-
frequency gain
Src
High
Source
Off...Tempo
Selects the
modulation source
for high-frequency
gain
Amt
High
Amount
–72...+72
Sets the amount by
which the high-
frequency gain will
be modulated
Trim ← 0...100 Sets the input level
L/Mid[Hz]
Low/Mid
[Hz]
100...500
Sets the frequency
where the low and
mid bands are
divided
Mid/H[Hz]
Mid/High
[Hz]
2000...6000
Sets the frequency
where the mid and
high bands are
divided
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
D
-mod
D
-mod
D
-mod
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Trim
Isolator
Low
Mid
High
Trim
Low
Mid
High
To Next Page
Loading...
Need help?
General
