Single size effects 007: St.Parametric 4EQ (Stereo Parametric 4EQ)
225
013: VOX Wah
This models the legendary VOX V847 and V848 Clyde McCoy
wah pedals. Its distinctive tone, sounding as though it were wrung
from the throat, made this pedal a favorite of many pro musicians.
014: St. Random Filter (Stereo
Random Filter)
This stereo band pass filter uses a step-shape waveform and
random LFO for modulation. You can create a special effect from
filter oscillation.
Paramter Value Explanation
Type Type V847, V848
Selects the type of
wah
Open ← 1...100
Sets the lower limit of
the wah center
frequency p.223
Close ← 1...100
Sets the upper limit of
the wah center
frequency p.223
Sweep Sweep Mode
Pedal(Dmod)
, Auto
Switches between
pedal wah and auto-
wah
Src Pedal Source 0...100
Specifies the
modulation source
that will use the pedal
wah
Manu
Pedal
Manual
0...100
Sets the center
frequency for the
pedal wah when the
modulation source is
not moved
Auto Sens
Auto
Sensitivity
0...100
Sets the auto-wah
sensitivity
Attack Auto Attack
Sets the auto-wah’s
attack speed
Pol Auto Polarity
Auto,
Dmod,
LFO
Specifies whether the
auto-wah sweep is
normal or inverted
Wet/Dry ←
Sets the balance
between the effect
and the dry input
Src Source
Selects a modulation
source for Wet/Dry
Amt Amount
Sets the modulation
amount for Wet/Dry
D
-mod
Auto Sensitivity
Envelope
Mode
Pedal(D-mod)
Auto
Wet / Dry
Left
Right
Wet / Dry
+
Wah
Attack / Polarity
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Paramter Value Explanation
LFO
LFO
Waveform
StpTri, Rndm
Selects the LFO
Waveform p.226
LFO Phase
[deg]
← –180...+180
Sets the LFO phase
difference between
the left and right
p.226
LFO [Hz]
LFO Freq
[Hz]
0.02...20.00
Sets the speed of the
LFO p.226
Src Source Off...Tempo
Selects the
modulation source
used for both LFO
speed and step speed
Amt Amount
–20.00...
+20.00
Sets the modulation
amount of LFO speed
Step[Hz]
Step Freq
[Hz]
0.05...50.00
Sets the LFO step
speed (speed that
changes in steps
p.226
Amt Amount
–50.00...
+50.00
Sets the modulation
amount of LFO step
speed
BPM/MIDI
Sync
← Off, On
When this is on, the
LFO speed is set by
BPM, Base Note, and
Times, instead of
Frequency p.223
BPM ←
MIDI,
40.00...
300.00
MIDI syncs to the
system tempo; 40–
300 sets the tempo
manually for this
individual effect p.226
Base Note ← ...
Selects the type of
notes that specify the
LFO speed p.226
Times ← x1...x32
Sets the number of
notes that specify the
LFO speed p.226
Step Base
Note
← ...
Selects the type of
notes to specify the
LFO step speed
p.226
Times ← x1...x32
Sets the number of
notes to specify the
LFO step speed
p.226
Manual Manual 0...100
Sets the filter center
frequency
Src Source Off...Tempo
Selects the
modulation source
for the filter center
frequency
Amt Amount –100...+100
Sets the modulation
amount for the filter
center frequency
Depth ← 0...100
Sets the modulation
depth of filter center
fr
equency
Src Source Off...Tempo
Selects the
modulation source of
filter modulation
Amt Amount –100...+100
Sets the modulation
amount of filter
modulation
Resonance ← 0...100
Sets the resonance
amount
Filter
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Filter
LFO Phase
LFO: Step-Tri/Random
To Next Page
Loading...
