Combination mode
74
1: C–INPUT/CTRL (INPUT/Controllers)
1–1: AUDIO IN
About the AUDIO IN
The external audio input settings in this page are active when the
front panel REALTIME CONTROLS section AUDIO IN 1 row's
SWITCH (ON/OFF) button is on.
G-SET (Use Global Setting) [Off, On]
Select [Line, Mic]
Pan [L000...L063, C064, R065...R127]
Input Level Meter
Level [000...127]
Mute/Play [Mute, Play]
Gain [00...82, MAX]
Bus (Bus Select) [L/R, IFX1...5, Off]
Send1 [000...127]
Send2 [000...127]
FX Control Bus [Off, FC1, FC2]
These settings are the same as in Program or Global mode.
See “1–1: AUDIO IN” on page 5
1–2: CONTROLLERS (Controllers Setup)
Here you can specify the functions of the front panel SW1 and
SW2 buttons, and set the tempo.
Note: The Panel Switch Assign setting of the program assigned to
each timbre will have no effect.
SW1
Assign [Off, ..., Pitch Bend Lock]
Mode [Toggle, Momentary]
SW2
Assign [Off, ..., Pitch Bend Lock]
Mode (SW2 Mode) [Toggle, Momentary]
These settings are the same as for a program.
See “1–2: CONTROLLERS (Controllers Setup)” on page 6
TEMPO
(Tempo) [40.00... 300.00, EXT]
See “
(Tempo)” on page 70
V
1–1, 2: FUNCTION
•0:
Write Combination, Write/Initialize Combination
see page
94
•1: Solo Setting see page 63
•2: Compare see page 64
•3: Auto Song Setup see page 64
•4: Add to Favorite see page 94
•5: Copy from Program see page 95
For more information, please see the “Combination: FUNCTION”
section on page 94.
Input Level Meter