Korg KROSS - Stereo BPM Delay

Effect Guide
272
BPM
Delay Base Note
Times
The delay time is the duration of Times number of Delay Base
Note note values at the BPM tempo (or if BPM is set to MIDI, the
tempo determined by MIDI Clock).
Time Over?
You can set the delay time up to 5,460 msec. If the delay time
exceeds this limit, the error message “OVER!” appears in the
display. Set the delay time parameters so that this message will not
appear. “Time Over?” is only a display parameter.
100: Stereo BPM Delay
This stereo delay enables you to set the delay time to match the
song tempo.
C Dly Note
C Delay
Base Note
...3
Selects the type of
notes to specify the
delay time for TapC
p.272
C Times Times x1...x32
Sets the number of
notes to specify the
delay time for TapC
p.272
C Level Level 0...50
Sets the output level
of TapC
R Dly Note
R Delay
Base Note
...3
Selects the type of
notes to specify the
delay time for TapR
p.272
R Times Times x1...x32
Sets the number of
notes to specify the
delay time for TapR
p.272
R Level Level 0...50
Sets the output level
of TapR
Feedback C
C Delay
Feedback
–100...+100
Sets the feedback
amount of TapC
Src Source Off...Tempo
Selects the
modulation source
for the TapC feedback
Amt Amount –100...+100
Sets the modulation
amount of the TapC
feedback
HiDamp[%]
High Damp
[%]
0...100
Sets the damping
amount in the high
range p.266
LoDamp[%]
Low Damp
[%]
0...100
Sets the damping
amount in the low
range p.266
InLvl Dmod
Input Level
Dmod [%]
–100...+100
Sets the modulation
amount of the input
level p.261
Src Source Off...Tempo
Selects the
modulation source
for the input level
p.261
Spread ← 0...50
Sets the width of the
stereo image of the
effect sound p.266
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Paramter Value Explanation
BPM ←
MIDI,
40.00...
300.00
MIDI syncs to the
system tempo; 40–
300 sets the tempo
manually for this
individual effect p.272
Time OverL?
L Delay
Time Over?
---, OVER!
Display the error
message if the left
channel delay time
exceeds the upper
limit p.273
Time OverR?
R Delay
Time Over?
---, OVER!
Display the error
message if the right
channel delay time
exceeds the upper
limit p.273
L Dly Note Base Note ...3
Selects the type of
notes to specify the
left channel delay
time p.272
Time ← x1...x32
Sets the number of
notes to specify the
left channel delay
time p.272
Adj[%] Adjust [%] –2.50...+2.50
Fine-adjust the left
channel delay time
R Dly Note Base Note ...3
Selects the type of
notes to specify the
right channel delay
time p.272
R Time Times x1...x32
Sets the number of
notes to specify the
right channel delay
time p.272
Adj[%] Adjust [%] –2.50...+2.50
Fine-adjust the right
channel delay time
L Feedback ← –100...+100
Sets the feedback
amount for the left
channel
Src Source Off...Tempo
Selects the
modulation source of
feedback amount
Amt Amount –100...+100
Sets the modulation
amount of the left
channel feedback
R Feedback ← –100...+100
Sets the feedback
amount for the right
channel
Amt Amount –100...+100
Sets the modulation
amount of the right
channel feedback
HiDamp[%]
High Damp
[%]
0...100
Sets the damping
amount in the high
range p.266
LoDamp[%]
Low Damp
[%]
0...100
Sets the damping
amount in the low
range p.266
InLvl Dmod
Input Level
Dmod [%]
–100...+100
Sets the modulation
amount of the input
level p.261
Src Source Off...Tempo
Selects the
modulation source
for the input level
p.261
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
S
ets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp
Low Damp
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Adjust [%]
Adjust [%]
Delay
Delay