Effect Guide
250
059:
Decimator
- Amp (
Decimator -
Amp Simulation)
This effect combines a mono decimator and an amp simulation.
You can change the order of the effects.
060: Decimator - Comp (Decimator
- Compressor)
This effect combines a mono decimator and a compressor. You can
change the order of the effects.
061: AmpSim - Tremolo (
Amp
Simulation- Tremolo)
This effect combines a mono amp simulation and a tremolo.
Paramter Value Explanation
Decimator
D Pre LPF Pre LPF Off, On
Turn the harmonic
noise caused by
lowered sampling on
and off p.229
HiDamp [%]
High Damp
[%]
0...100
Sets the ratio of high-
range damping
D Fs[Hz]
Sampling
Freq [Hz]
1.00k...48.00
k
Sets the sampling
frequency
Bit Reso
Resolution
[bit]
4...24
Sets the data bit
length p.229
D OutLevel Level 0...100
Sets the decimator
output level p.229
Amp Simulation
A Amp Type Amp Type SS, EL84, 6L6
Selects the type of
guitar amplifier
Routing ←
Decimater →
Amp,
Amp →
Decimator
Switches the order of
the decimator and
amp simulation
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Paramter Value Explanation
Decimator
P Pre LPF Pre LPF Off, On
Turn the harmonic
noise caused by
lowered sampling on
and off p.229
HiDamp [%]
High Damp
[%]
0...100
Sets the ratio of high-
range damping
D Fs[Hz]
Sampling
Freq [Hz]
1.00k...48.00
k
Sets the sampling
frequency
Bit Reso Resolution 4...24
Sets the data bit
length p.229
D OutLevel Level 0...100
Sets the decimator
output level
p.229
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Decimator
Routing
Amp Simulation
Amp Simulation Filter
Pre LPF
High Damp
Output Level
Decimator
Resolution
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Decimator
Routing
Pre LPF
High Damp
Output Level
Decimator
Resolution
Compressor
Comp
Output Level
Envelope - Control
Compressor
C Sens Sensitivity 1...100
Sets the sensitivity
p.217
C Attack Attack 1...100
Sets the attack level
p.217
Out Level Level 0...100
Sets the compressor
output level p.217
Routing ←
Dec → Cmp,
Cmp → Dec
Switches the order of
the decimator and
compressor
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Paramter Value Explanation
Amp Simulation
A Amp Type Amp Type SS, EL84, 6L6
Selects the type of
guitar amplifier
Tremolo
T LFO Wave
LFO
Waveform
Tri (Triangle),
Sine,
Vntage(Vinta
ge),
Up, Down
Selects the LFO
Waveform p.238
LFO Shape ← –100...+100
Changes the
curvature of the LFO
Waveform p.224
T LFO[Hz]
LFO Freq
[Hz]
0.02...20.00
Sets the speed of the
LFO
Depth ← 0...100
Sets the depth of LFO
modulation
Wet/Dry ←
Dry, 1 : 99...
99 : 1, Wet
Sets the balance
between the effect
and the dry input
Src Source Off...Tempo
Selects a modulation
source for Wet/Dry
Amt Amount –100...+100
Sets the modulation
amount for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Amp Simulation Tremolo
Amp Simulation Filter
Tremolo
LFO: Tri/Sin/Vintage/Up/Down
LFO Shape