Panasonic FP7 Series Command Reference Manual

■
Operand [S2] setting
● Specify the starting address of the device area that stores the string data that indicates a
destination group name, or a character constant.
Setting item Settings
Setting
range
S2
Destination group
name
Specify a destination group name.
Specify the keyword "GRPNAME=" at the beginning.
GRPNAME=Destination group name
Maximum 64
one-byte
characters
(Note 1) Upper and lower case characters can be used for specifying keywords.
Setting example
Exam
ple 1
S2 "GRPNAME=Grp0"
Settings Group name: Grp0
Exam
ple 2
S2 "GrpName=Grp1"
Settings Group name: Grp1
■
Operand [S3] setting
● Specify the starting address of the device area that stores the string data that indicates a
destination address, or a character constant.
Setting item Settings
S3
Destination
address
(Host name)
Specify a destination address (host name). Specify the keyword “TO=” at the
beginning.
TO=Destination address
(Note 1) The destination address of S3 can be specified with a host name only or host name and domain
name.
(Note 2) When a domain name is omitted, the destination address is created by the addition of the domain
name of S4.
(Note 3) Multiple addresses can be specified by separating each address with ",".
(Note 4) Upper and lower case characters can be used for specifying keywords.
Setting example
Exam
ple 1
S3 "TO=suzuki@sunx.co.jp"
Settings
Destination address: suzuki@sunx.co.jp,
Domain name: Specified for [S3]
Exam
ple 2
S3 "TO=sato"
Settings
Destination address: sato@sunx.co.jp,
Domain name: Omitted for [S3], specified as "DOMAIN=sunx.co.jp" for [S4].
Exam
ple 3
S3 "TO=suzuki@sunx.co.jp,yamamoto@pana.co.jp"
Settings
Destination address: Multiple addresses (suzuki@sunx.co.jp and yamamoto@pana.co.jp) are
specified,
17.23 SMTPcADD (Destination Group Setting)
WUME-FP7CPUPGR-12 17-117

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English