Panasonic FP7 Series Command Reference Manual

Domain name: Specified for [S3]
Exam
ple 4
S3 "TO=yamamoto,ito"
Settings
Destination address: Multiple addresses (yamamoto@pana.co.jp and ito@pana.co.jp) are
specified.
Domain name: Omitted for [S3], specified as "DOMAIN=pana.co.jp" for [S4].
Exam
ple 5
S3 "TO=suzuki@sunx.co.jp,yamamoto,ito"
Settings
Destination address: Multiple addresses are specified.
Domain name: Mix of specified/omitted for [S3], specified "DOMAIN= pana.co.jp" for [S4].
■
Operand [S4] setting
Specify the starting address of the device area that stores the string data that indicates a
destination address (domain name), or a character constant.
Setting item Settings
Setting
range
S4
Destination
address
(Domain
name)
Specify a destination address (domain name). Specify the
keyword “DOMAIN=” at the beginning.
DOMAIN=Domain name
Maximum 32
one-byte
characters
(Note 1) When a domain name is omitted for the specification of the destination address of S3, a specified
domain name is added.
(Note 2) When all domain names are specified for the specification of the destination addresses of S3, the
specification of the domain name of S4 can be omitted.
(Note 3) Only one domain name can be specified.
(Note 4) Upper and lower case characters can be used for specifying keywords.
Setting example
Exam
ple 1
S4 "DOMAIN=sunx.co.jp"
Settings Domain name: sunx.co.jp
Exam
ple 2
S4 "Domain=sunx.co.jp"
Settings Domain name: sunx.co.jp
Exam
ple 3
S4 "DOMAIN="
Settings Domain name: Omitted
■
Flag operations
Name Description
SR7
SR8
(ER)
Set when a value outside the range is specified for the parameter.
To be set when the slot number [S1] specified with UNITSEL is not 100 (built-in ET-LAN).
To be set when even one request active relay of mail transmission control relay or mail
transmission logging/trace control relay is 1: Requesting.
To be set when the domain name for [S4] is omitted while the destination address [S3] is also
specified with the domain name omitted.
To be set when executed in an interrupt program.
17.23 SMTPcADD (Destination Group Setting)
17-118 WUME-FP7CPUPGR-12

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English