Panasonic FP7 Series Command Reference Manual

Character strings added to mails (Japanese) Character strings added to mails (English)
PLC status change (Power On) PLC status change (Power On)
PLC status change (Prog > Run) PLC status change (Prog > Run)
PLC status change (Run > Prog) PLC status change (Run > Prog)
PLC status change (Operation stop error) PLC status change (Operation stop error)
PLC status change (Operation continuous error) PLC status change (Operation continuous error)
PLC status change (Error release) PLC status change (Error release)
SMTPcREQ command (PB##, xxxx) SMTPcREQ command (PB10, 100)
(Note 1) IPv4 address is output only when using IPv4 address, and IPv6 address is output only when using
IPv6 address.
(Note 2) The language to be output to mails is specified in the mail server setting.
Device information added to mail text
Character strings added to mails (Japanese) Character strings added to mails (English)
Device get information Device get information
Device number: DT100 Device number: DT100
Getting number: 4 devices Getting number: 4 devices
Conversion method Exchange method:
1234, 5558, 764, 18270 1234, 5558, 764, 18270
(Note 1) The language to be output to mails is specified in the mail server setting.
■
Operand [S4] Device setting
Set Description
Source
device
setting
Specify the source device setting.
● Global device
Specify device code + device number.
Example) such as "WX10", "WR1024", and "DT123456"
● Local device
"PB" + PB number + "_" (underbar) + Device code + Device number
Example) such as "PB1_WX50", "PB80_WR512", and "PB200_DT1024"
Devices that can be specified
Global devices Local devices
WX WX
WY WY
WR WR
WL WL
DT DT
LD LD
SD
17.24 SMTPcSET (Mail Transmission Setting)
WUME-FP7CPUPGR-12 17-127

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English