Setting
item
Settings Setting range
S3 Body
Specify the starting address of the device area that stores the
string data that indicates mail text, or a character constant.
Maximum 256 one-
byte characters
■
Operand [S4] setting
Specify the starting address of the device area that stores the string data that indicates the
settings for text auto generation and file attachments, or a character constant.
Setting
item
Settings
S4
Add or not add
character strings
automatically
generated by the
unit
Specify whether to generate a message automatically or not.
Specify the keyword “INFO=” at the beginning.
Not generate a message automatically: INFO=NONE
Generate a message automatically: INFO=AUTO
Attach or not attach
files
Specify whether to attach files or not.
Specify the keyword “ATT=” at the beginning.
Not attach files: ATT=NONE
Attach files: ATT=FILE
(Note 1) Input each parameter for setting whether or not to generate a message automatically and whether or
not to attach files separated by a comma ",".
(Note 2) The parameters for the automatic generation and file attachment cannot be omitted. Specify them in
the order of the above table. The order of keywords cannot be changed.
(Note 3) Upper and lower case characters can be used for specifying keywords.
Setting example
Exam
ple 1
S4 "INFO=NONE,ATT=NONE"
Settings Generate a message automatically: No, Attach files: No
Exam
ple 2
S4 "Info=AUTO,Att=FILE"
Settings Generate a message automatically: Yes, Attach files: Yes
Automatic additional information
Character strings added to mails (Japanese) Character strings added to mails (English)
Basic information Basic information
Source From:
CPU Part Number: (Example: CPS4RE, etc.) CPU Part Number:
IPv4 address IPv4 address:
IPv6 address IPv6 address:
Logging Trace ID: Logging Trace ID:
File fixed Time: File fixed Time:
17.25 SMTPcLOG (Logging/Trace Mail Setting)
WUME-FP7CPUPGR-12 17-133
To Next Page
Loading...
