■
Flag operations
Name Description
SR7
SR8
(ER)
To be set when the slot number [S1] specified with UNITSEL is not 100 (built-in ET-LAN).
To be set when the send request relay of the mail send logging/trace control relay for a target LOG
number is "1: Request".
To be set when the LOGn send setting for a target LOG number is not registered.
To be set when an out-of-range number is specified for a destination group number.
To be set when an out-of-range value is specified for parameters.
To be set when executed in an interrupt program.
Set when the number of characters for operand specifying character constant exceeds 256.
To be set when an unset destination group number is specified.
To be set when a mail sending server is not specified.
To be set when a mail sending server that has not been specified with the destination server
setting instruction or the tool software is specified.
To be set when a destination group number that has not been specified with the destination group
setting instruction or the tool software is specified.
CY
(SR9)
Set when the instruction is the initialization of Ethernet. The detail code set in SD29 is "11:
Ethernet initialization active".
(Note 1) For details of the error codes stored in the system data SD29, refer to "20.2 List of System Data
Registers".
17.25 SMTPcLOG (Logging/Trace Mail Setting)
17-134 WUME-FP7CPUPGR-12
To Next Page
Loading...
Need help?
General
