Panasonic FP7 Series Command Reference Manual

■
Program example
SR14
DT100EIPMSATT
（（ ））
DF
R1
X6B
UNITSEL U100 U1
CIPMSET DT500DT200 U5
1st scan
OFF
EIP
preparation
done flag
DT500EIPMBODY
R1
＜＜ ＞＞
SET
R1
EIPMSEND DT1000 DT2000
R1
＜＜ ＞＞
RST
DT2000=0
Processing when transmission is
completed successfully
EIPMSEND
execution relay
■
Flag operations
Name Description
SR7
SR8
(ER)
To be set when the unit specified by UNITSEL is not an Ethernet unit.
To be set when the EtherNet/IP function is set to Not Use in the Ethernet unit configuration.
To be set in case of out-of-range in indirect access (index modification).
Set when executed in an interrupt program.
To be set when 253-word device cannot be assured from the device address specified by
[D1].
To be set when 3-word device cannot be assured from the device of D2.
17.32 EIPMSEND (EIP Message Send)
WUME-FP7CPUPGR-12 17-161

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English