Status code Status name Description
0x29 Member not settable A request to modify a non-modifiable member was received.
0x2A Group 2 only server
general failure
This error code is reported by DeviceNet Group 2 only. It is used
only as substitute for those with a code space of 4K or less, for the
service not supported, for the attribute not supported, and for the
attribute not settable.
0x2B Unknown Modbus
Error
A CIP to Modbus translator has received an undefined Modbus
exception code.
0x2C Attribute not gettable A request to read a non-readable attribute was received.
0x2D Instance Not Deletable The requested object instance cannot be deleted.
0x2E Service Not Supported
for Specified Path 1
The object supports the service, but not for the designated
application path (for example, attribute). Note: This cannot be used
in cases where more specific general status codes are applied.
Example: 0x0E (attributes are not settable) or 0x29 (members are
not settable).
0x2F to 0xCF Reserved by CIP for future extensions.
0xD0 to 0xFF Reserved for Object
Class specific errors
This range of error codes is to be used to indicate errors specific to
the object class. Use of this range should only be performed when
none of the error codes presented in this table accurately reflect the
error that was encountered.
17.34 CIPMGET (CIP Message Data Getting)
WUME-FP7CPUPGR-12 17-179
To Next Page
Loading...
Need help?
General
