Panasonic FP7 Series - Page 16

17.4 IPv4SET (IP Address Setting)...........................................................17-23
17.5 pPINGREQ (PING Request).............................................................17-28
17.6 CONSET (User Connection Setting).................................................17-32
17.7 OPEN (Connection Open) ................................................................17-39
17.8 CLOSE (Connection Close)..............................................................17-41
17.9 NTPcSV (NTP Destination Server Setting Instruction) .....................17-43
17.10 pNTPcREQ (Time Adjustment Request Instruction).......................17-47
17.11 FTPcSV (FTP Client Connected Server Setting) ............................17-52
17.12 FTPcSET (FTP Client Transfer Setting) .........................................17-59
17.13 FTPcLOG (FTP Client Logging/Trace Transfer Setting).................17-69
17.14 FTPcREQ (FTP Client Transfer Request) ......................................17-73
17.15 FTPcCTL (FTP Client Transfer Control) .........................................17-77
17.16 HTTPcSV (HTTP Client Connected Server Setting).......................17-81
17.17 HTTPcSET (HTTP Client Transfer Setting) ....................................17-87
17.18 HTTPcREQ (HTTP Client Transfer Request) .................................17-94
17.19 HTTPcCTL (HTTP Client Transfer Control) ....................................17-98
17.20 SMTPcBDY (Mail Text Setting).......................................................17-102
17.21 SMTPcBRD (Mail Text Read) .........................................................17-105
17.22 SMTPcSV (Mail Server Setting)......................................................17-108
17.23 SMTPcADD (Destination Group Setting)........................................17-115
17.24 SMTPcSET (Mail Transmission Setting).........................................17-120
17.25 SMTPcLOG (Logging/Trace Mail Setting) ......................................17-130
17.26 SMTPcREQ (Mail Send Request)...................................................17-135
17.27 SMTPcCTL (Mail Transmission Control) ........................................17-139
17.28 ETSTAT (Acquiring EtherNet/IP Information)..................................17-142
17.29 EIPNDST (EtherNet/IP Node Status Acquisition Instruction) .........17-148
17.30 EIPMSATT (EIP Message Send Destination Setting).....................17-152
17.31 EIPMBODY (EIP Message Body Setting).......................................17-155
17.32 EIPMSEND (EIP Message Send)...................................................17-158
17.33 CIPMSET [CIP Message Data Setting (Merging)] ..........................17-162
17.34 CIPMGET (CIP Message Data Getting) .........................................17-168
17.35 EIPSTART (Cyclic Communication Start Request).........................17-180
17.36 EIPSTOP (Cyclic Communication Stop Request)...........................17-183
17.37 EIP_IN (EtherNet/IP Input Refresh)................................................17-186
17.38 EIP_OT (EtherNet/IP Output Refresh)............................................17-191
17.39 SEND (MC Protocol Master)...........................................................17-195
17.40 RECV (MC Protocol Master)...........................................................17-201
18 High-level Instructions (SD Memory Card).......................................18-1
18.1 CDTWT (Operation Memory File Write in BIN Format) ....................18-2
xvi
WUME-FP7CPUPGR-12