Panasonic FP7 Series Command Reference Manual

Oper
ation
unit
Conv
ersio
n
direct
ion
Control
character
string
Binary data ASCII data Description
US
Rever
se
%+10.7b H 0123 "␣␣␣0000123"
When %b is specified, the result is
not signed.
US
Forwa
rd
%8.5X, H 0123 "2301␣0␣␣"
If an 8-character string is converted
in the forward direction, it appears as
shown below.
US
Forwa
rd
%05b H 01233456 "2301056340"
Conversion of an odd number of
characters in the forward direction is
as shown below.
SF
Rever
se
%+10.3e SF123.4567 "1.235e+02␣"
The exponent is output with at least
two digits.
■
Options for the control string [S1]
Items Control
character
string
Binary data ASCII data Description
Specification
of upper /
lower case
characters
%x H ABCD "abcd"
Specify alphabetical upper or lower
case characters used in hexadecimal
and exponential notation ASCII data.
%X H ABCD "ABCD"
%e SF1234.567 "1.234567e+3"
%E SF1234.567 "1.234567E+3"
Specification
of the number
of display
digits
%d K 100 "100"
The display digit is specified with "Total
number of characters" and "Number of
characters of precision."
It is specified with “n.m”, “n”, or “.m”,
etc.
n: Total number of characters, m:
Number of characters of precision
<Number of characters of precision>
[d , i , u , x , X , b] represent the number
of characters in numerical strings.
[f , e , E] represent the number of
characters after the decimal point.
[g , G] represent the number of
significant figures.
If the number of characters is not
specified, the number of digits and the
storage area size of the converted data
will vary according to the data before
conversion.
%5d K 100 "␣␣100"
%10.5d K 100 "␣␣␣␣␣00100"
%x H 12A "12a"
%5x H 12A "␣␣12a"
%10.5x H 12A "␣␣␣␣␣0012a"
%b H 123 "123"
%5b H 123 "␣␣123"
%f SF 123.4567 "123.4567"
%8.3f SF 123.4567 "␣123.457"
%e SF 1234.567 "1.234567e+03"
%10.3e SF 1234.567 "␣1.235e+03"
%g SF 1234.567 "1234.567"
%8.6g SF 1234.567 "␣1234.57"
Specification
of zero
padding
%05d K 100 "00100"
When the setting for the display digit is
available, zero padding can be
specified. Put zero (0) before the
display digit.
%05x H 12A "0012a"
%05b H 123 "00123"
%08.3f SF 123.4567 "0123.457"
%010.3e SF 1234.567 "01.235e+03"
14.9 BTOA (Conversion: BIN → ASCII)
WUME-FP7CPUPGR-12 14-33

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English