Panasonic FP7 Series Command Reference Manual

■
Precautions for programming
● Character data of the [D] area from before performing the operation is not cleared. (It is
overwritten.)
● If the number of characters [n] is larger than the number of characters in the string of [S1] as
from the position specified by [p], then the replacement is performed for the number of
characters of the string [S1] as from the position specified by [p].
● The [p] position should be specified by a number counted from low order in sequence,
putting the least significant byte as K0 (Byte 0): 0, 1, 2 and so on.
■
Flag operations
Name Description
SR7
SR8
(ER)
To be set in the case of out-of-range in indirect access (index modification).
To be set when the number of characters > string size.
To be set when the number of characters of [D] is smaller than [n].
To be set when [S2] (number of characters) is out of the range.
14.25 SREP (Replacement of a String)
WUME-FP7CPUPGR-12 14-103

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English