Panasonic FP7 Series Command Reference Manual

Device No. Application
SD90
FP7 multi-wire link unit 1 error (High-order 8 bits = Error code, Low-order 8 bits = Unit
number)
SD91
FP7 multi-wire link unit 2 error (High-order 8 bits = Error code, Low-order 8 bits = Unit
number)
SD92
FP7 multi-wire link unit 3 error (High-order 8 bits = Error code, Low-order 8 bits = Unit
number)
SD93
FP7 multi-wire link unit 4 error (High-order 8 bits = Error code, Low-order 8 bits = Unit
number)
SD94
FP7 multi-wire link unit 5 error (High-order 8 bits = Error code, Low-order 8 bits = Unit
number)
SD95
FP7 multi-wire link unit 6 error (High-order 8 bits = Error code, Low-order 8 bits = Unit
number)
(Note 1) Error information can be read by PMGET instruction.
■
Flag operations
Name Description
SR7
SR8
(ER)
To be set when the error code n is out of the range.
16.8 ERR (When FP7 Multi-wire Link Unit Is Used)
16-28 WUME-FP7CPUPGR-12

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English