Panasonic FP7 Series Command Reference Manual

Setting example
Exam
ple 1
S1 "IPv4=111.122.133.144,TIMEZONE=+0900"
Settings NTP server (IPv4): 111.122.133.144, Time zone: GMT+09:00
Setting example when omitting a part of a keyword
Exam
ple 2
S1 "HOST=ntp.pidsx.com"
Settings NTP server (Host name): ntp.pidsx.com, Time zone: Unchanged
Exam
ple 3
S1 ",TIMEZONE=+0900"
Settings NTP server (IPv4): Unchanged, Time zone: GMT+09:00
Exam
ple 4
S1 ""
Settings NTP server (IPv4): Unchanged, Time zone: Unchanged
■
Details of operand [S2]
Specify the starting address of the device area that stores the string data that indicates the
parameters for specifying time acquisition timing, or a character constant.
Setting
item
Settings
S2
Once daily
Appointed time
(can be omitted)
Time data acquisition timing: Once a day at a specified time.
DAY=DISABLE: Not set
HHMM: Set, HH: hour "00" to "23", MM: minute "00" to "59"
Once weekly
Specified day of
the week and
time
(can be omitted)
Time data acquisition timing: Once a week at a specified day of the week and
time.
WEEK=DISABLE: Not set
WHHMM: Set, W: 0 (Sunday) to 6 (Saturday), HH: hour "00" to "23", MM:
minute "00" to "59"
Once monthly
Specified date
and time
(can be omitted)
Time data acquisition timing: Once a month at a specified date and time.
MONTH=DISABLE: Not set
DDHHMM: Set, DD: "01" to "28", HH: hour "00" to "23", MM: minute "00" to
"59"
● Input "Once daily/specified time", "Once weekly/specified day of the week and time" or "Once
monthly/specified date and time" separated by a comma ",".
● The keywords should be specified in the order shown in the above table. Both upper and
lower cases can be used for specifying keywords.
● A part of parameters can be omitted. Omitted parameters are not changed.
● When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
● When omitting the part after a specified keyword, omit both "," and "keyword".
● It is prohibited to specify the same keyword redundantly. An error is caused in the case of
redundant specification.
Setting example
Exam
ple 1
S2 "DAY=1234,WEEK=62345,MONTH=010010"
Settings
Once daily/specified time: Once daily at 12:34, Once weekly/specified day of the week
and time: Every Saturday at 23:45, Once monthly/specified date and time: First day of
every month at 00:10
17.9 NTPcSV (NTP Destination Server Setting Instruction)
WUME-FP7CPUPGR-12 17-45

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English