Settings User name: Delete, Password: Delete
Exam
ple 4
S2 "USER=root"
Settings User name: root, Password: Not change
Exam
ple 5
S2 ",PASS=SUNX"
Settings User name: Not change, Password: SUNX
■
Special keyword of operand [S2] setting
Special keyword Description
INITIAL Set an initial value.
KEEP The current setting is not changed.
Setting example
Exam
ple 1
S2 “INITIAL”
Settings User name: root, Password: root
Exam
ple 2
S2 “KEEP”
Settings User name: Not change, Password: Not change
■
Operand [S3] setting
● Specify the starting address of the device area that stores the string data that indicates
parameters, or a character constant.
● A part of parameters can be omitted. The settings are not changed when parameters are
omitted partially.
● When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
● When omitting the part after a specified keyword, omit both "," and "keyword".
● When "INITIAL" or "KEEP" is specified instead of parameters, the instruction operates
according to the table of special keywords.
● It is prohibited to specify the same keyword redundantly. An error is caused in the case of
redundant specification.
Setting
item
Settings Setting range
S3
Timeout period
(Can be omitted)
Specify a timeout period.
TOUT=: Time setting (Default: 60 seconds)
30 to 300
seconds
No. of retries
(Can be omitted)
Specify the number of retries.
RTRY=: Number of retries (Default: 3 times)
0 to 3
Retry interval
(Can be omitted)
Specify the retry interval.
RTTM=: Retry interval (Default: 600 seconds)
(Note 4)
10 to 86400
seconds
(Note 1) Input a timeout period, number of retries and retry interval separated by a comma ",".
(Note 2) Both upper and lower cases can be used for specifying keywords.
(Note 3) Specify the detailed setting parameters in the order of the above table.
17.11 FTPcSV (FTP Client Connected Server Setting)
17-56 WUME-FP7CPUPGR-12
To Next Page
Loading...
Need help?
General
