Panasonic FP7 Series - Page 943

● When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
● When omitting the part after a specified keyword, omit both "," and "keyword".
● When "INITIAL" or "KEEP" is specified instead of parameters, the instruction operates
according to the table of special keywords.
● It is prohibited to specify the same keyword redundantly. An error is caused in the case of
redundant specification.
Setting
item
Settings Setting range
S2
User
name
(Can be
omitted)
Specify a user name.
Specify the keyword “USER=” at the beginning.
USER=XXX (Default: root)
Maximum 32 one-
byte characters
Passwor
d
(Can be
omitted)
Specify a password.
Specify the keyword “PASS=” at the beginning.
PASS=XXX (Default: root)
Maximum 32 one-
byte characters
(Note 1) Input a user name and password separated by a comma ",".
(Note 2) Both upper and lower cases can be used for specifying keywords.
(Note 3) Specify the login setting parameters in the order of the above table.
Setting example
Exam
ple 1
S2 "USER=root,PASS=pidsx"
Settings User name: root, Password: pidsx
Exam
ple 2
S2 "USER=PANASONIC,PASS=SUNX"
Settings User name: PANASONIC, Password: SUNX
■
Operand [S2]: user name and password setting
Patterns How to specify
Specify user name: Delete password "USER=xxx,PASS="
Delete user name: Specify password "USER=,PASS=xxx"
Delete user name: Delete password "USER=,PASS="
Specify user name: Not change password "USER=xxx"
Not change user name: Specify password ",PASS=xxx"
Setting example
Exam
ple 1
S2 "USER=root,PASS="
Settings User name: root, Password: Delete
Exam
ple 2
S2 "USER=,PASS=SUNX"
Settings User name: Delete, Password: SUNX
Exam
ple 3
S2 "USER=,PASS="
17.11 FTPcSV (FTP Client Connected Server Setting)
WUME-FP7CPUPGR-12 17-55